AD5241BRUZ10 OverviewThere are 14-TSSOP (0.173, 4.40mm Width) packages in this package.Volatile is the point at which this pentometer starts to be stored.This digital potentiometer has 1 embedded circuits.Tube package provides access to it.To protect this pentometer from overcurrent, there are 256 taps.Positions 256 make up this pentometer.Digital potentiometer is designed wdigital potentiometerh terminations of 14.Listed below are 1 functions included in this programmable potentiometer.Its total resistance will be 10000Ohm.The performance of 2.5V is provided by 2.5V.In the digi devices, 14 pins can be seen.The mounting direction should be Surface Mount.It is possible for the potentionmeter to supply voltages of 2.7V~5.5V ±2.3V~2.7V.In this digital potentiometer, the temperature range is -40°C~105°C.There is a possibility of limiting the flow by 10kOhm.The AD5241 family contains pentometer.By Surface Mount, digital potentiometer is mounted.There are 14 pins on this potentiameter.When using this digital variable resistor, Selectable Address can be found.At 3/5V, it can deliver voltage.In order for it to function properly, the supply current must be operated at 100nA.Despite its 400kHz frequency, it can maintain high accuracy.Supply currents up to 100nA are supported.During quiescence, potentiameter consumes 100nA volts of current.Data transfers are limited to 650 kHz bandwidth.Make sure the dual supply voltage on this pentometer is 2.7V.In order to maintain stable power, pentometer runs dual supply voltage up to 2.3V volts.
AD5241BRUZ10 FeaturesAvailable in 14-TSSOP (0.173, 4.40mm Width) package
1 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~105°C
14 pins
Quiescent Current at 100nA
AD5241BRUZ10 ApplicationsThere are a lot of Analog Devices Inc.
AD5241BRUZ10 Digital Potentiometers applications.
Modern office equipment
Industrial control
Medical equipment
Refrigerator
Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
Adjusting the LCD Display
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| Tolerance | ±30% |
| JESD-609 Code | e3 |
| Feature | Selectable Address |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Temperature Coefficient | 30 ppm/°C |
| Resistance | 10kOhm |
| Number of Positions | 256 |
| Voltage - Supply | 2.7V~5.5V ±2.3V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD5241 |
| Pin Count | 14 |
| Power Supplies | 3/5V |
| Configuration | Potentiometer |
| Interface | I2C |
| Number of Circuits | 1 |
| Operating Supply Current | 100nA |
| Nominal Supply Current | 100nA |
| Memory Type | Volatile |
| Max Supply Current | 100nA |
| Quiescent Current | 100nA |
| Bandwidth | 0.65 kHz |
| Taper | Linear |
| Max Dual Supply Voltage | 2.7V |
| -3db Bandwidth | 650 kHz |
| Min Dual Supply Voltage | 2.3V |
| Dual Supply Voltage | 2.5V |
| Negative Supply Voltage-Nom | -2.5V |
| Number of Taps | 256 |
| Total Resistance | 10000Ohm |
| Resistance - Wiper (Ω) (Typ) | 60 |
| Resistor Terminal Voltage-Max | 5.5V |
| Height | 1mm |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD5241BRUZ10 Datasheet
+8613715157867