AD532SD/883B Overview
The packaging of the product is made up of Tube.Embedded in the 14-CDIP (0.300, 7.62mm) package, it is cost-effective.It is common to use 4-Quadrant bits per stage.It operates at a voltage of 15V.There is a nominal negative supply voltage of -15V.An modulated radio-frequency signal occupies the frequency range of 1MHz.A 14 termination is used to prevent signals from reflecting off the end of the transmission line.Electronic parts with a number of similarities can be found under its base part number AD532.Known for its high quality and superior performance, it is a type of 14-pin electronic component.To mount it on the PCB, Through Hole is used.Electronic devices should be operated at a maximum temperature of 125°C.Electronic devices should be operated at a minimum temperature of -55°C.It is ideally suited to the operating supply voltage of 6mA.Dual supply voltages should be higher than 10V.Dual supply voltages should be lower than 22V.The ANALOG MULTIPLIER OR DIVIDER IC functions as an analog IC.An modulated radio-frequency signal occupies the frequency range of 1MHz.Due to its ability to support the maximum input voltage of 10V, designers are able to take full advantage of its flexibility.A dual supply voltage of 15V is used to operate it.It is possible to store information in 4 bits.The device is capable of operating from a supply voltage of 22V.A number of 1 elements are incorporated into the design.
AD532SD/883B Features
Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 1MHz
Operating supply current of 6mA
Operating supply voltage of 22V

AD532SD/883B Applications
There are a lot of Analog Devices Inc.
AD532SD/883B Analog Multipliers & Dividers applications.

Inverse/same-phase proportional circuit
Addition and subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator and differentiator circuits
Logarithmic and exponential operation circuits
Multiplication and division circuits
Precision measurement
Power control
Information processing
Weak signal detection

Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Factory Lead Time	12 Weeks
Contact Plating	Lead, Tin
Mount	Through Hole
Package / Case	14-CDIP (0.300, 7.62mm)
Number of Pins	14
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn63Pb37)
Max Operating Temperature	125°C
Min Operating Temperature	-55°C
Terminal Position	DUAL
Supply Voltage	15V
Base Part Number	AD532
Function	Analog Multiplier/Divider
Operating Supply Voltage	22V
Number of Elements	1
Temperature Grade	MILITARY
Analog IC - Other Type	ANALOG MULTIPLIER OR DIVIDER
Operating Supply Current	6mA
Number of Bits	4
Accuracy	1 %
Slew Rate	45 V/μs
Max Input Voltage	10V
Bandwidth	1MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Settling Time	1 μs
Max Dual Supply Voltage	22V
-3db Bandwidth	1MHz
Min Dual Supply Voltage	10V
Screening Level	MIL-STD-883 Class B
Dual Supply Voltage	15V
Number of Bits/Stages	4-Quadrant
Height Seated (Max)	5.08mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead