AD534JD OverviewPacking materials Tube are used.This module is embedded within the 14-CDIP (0.300, 7.62mm) package in order to provide cost-effectiveness.There is a considerable amount of use of 4-Quadrant bits per stage.The device operates at a voltage of 15V.In this case, the supply voltage is nominally negative and referred to as -15V.There is a modulated radio-frequency signal in the range of 1MHz.In order to prevent signals from reflecting off the other end of the transmission line, there are 14 terminations.The reflow temperature limit NOT SPECIFIED is determined by the component having the lowest temperature tolerance.The ANALOG MULTIPLIER OR DIVIDER integrated circuit operates on an analog basis.Upon reaching 70°C, the maximum operating temperature is allowed.A normal operation of the device requires a maximum supply voltage of 18V.
AD534JD FeaturesSupplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 1MHz
AD534JD ApplicationsThere are a lot of Rochester Electronics, LLC
AD534JD Analog Multipliers & Dividers applications.
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video and image computer boards
Medical instruments
Television broadcasting equipment
Displayers for aircraft and air transportation control systems
Package / Case | 14-CDIP (0.300, 7.62mm) |
Surface Mount | NO |
Packaging | Tube |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Obsolete |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 14 |
Terminal Finish | GOLD |
Terminal Position | DUAL |
Terminal Form | THROUGH-HOLE |
Peak Reflow Temperature (Cel) | NOT SPECIFIED |
Supply Voltage | 15V |
Terminal Pitch | 2.54mm |
Reach Compliance Code | unknown |
Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
JESD-30 Code | R-CDIP-T14 |
Function | Analog Multiplier/Divider |
Qualification Status | COMMERCIAL |
Operating Temperature (Max) | 70°C |
Supply Voltage-Max (Vsup) | 18V |
Temperature Grade | COMMERCIAL |
Supply Voltage-Min (Vsup) | 8V |
Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
Bandwidth | 1MHz |
Neg Supply Voltage-Nom (Vsup) | -15V |
Neg Supply Voltage-Max (Vsup) | -18V |
Neg Supply Voltage-Min (Vsup) | -8V |
Positive Input Voltage-Max | 10V |
Negative Input Voltage-Max | -10V |
Number of Bits/Stages | 4-Quadrant |
Length | 17.78mm |
Height Seated (Max) | 5.08mm |
Width | 7.62mm |
RoHS Status | Non-RoHS Compliant |
Contact Plating | Lead, Tin |
Mount | Through Hole |
Number of Pins | 14 |
JESD-609 Code | e0 |
Pbfree Code | no |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Termination | Through Hole |
ECCN Code | EAR99 |
Terminal Finish | Tin/Lead (Sn63Pb37) |
Max Operating Temperature | 70°C |
Min Operating Temperature | 0°C |
Max Power Dissipation | 500mW |
Base Part Number | AD534 |
Number of Channels | 1 |
Max Supply Voltage | 18V |
Min Supply Voltage | 8V |
Operating Supply Current | 6mA |
Output Current | 30mA |
Number of Bits | 4 |
Accuracy | 0.25 % |
Slew Rate | 20 V/μs |
Max Input Voltage | 10V |
Settling Time | 2 μs |
Max Dual Supply Voltage | 18V |
-3db Bandwidth | 1MHz |
Max Frequency | 1MHz |
Min Dual Supply Voltage | 8V |
Dual Supply Voltage | 15V |
Height | 2.41mm |
Width | 7.37mm |
REACH SVHC | No SVHC |
Radiation Hardening | No |
Lead Free | Contains Lead |