AD549JHZ OverviewPackaging for the buffer amplifier is in the form of a TO-99-8 Metal Can case. A General Purpose-type buffer amplifier is shown here. There is a Bulk case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. Using a supply current of 700μA , this buffer op amp will be able to operate. Keeping the voltage gain at 120dB is the best course of action. 1 channels are available on the instrumentation amplifier. The Topgate™ stands for the buffer op amp's serial number. As a result, linear amplifier's quiescent current is 700μA.
AD549JHZ Features8 Pins
supply voltage of 15V
120dB voltage gain
AD549JHZ ApplicationsThere are a lot of Analog Devices Inc.
AD549JHZ Instrumentational OP Amps applications.
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Factory Lead Time | 10 Weeks |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-99-8 Metal Can |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Bulk |
| Series | Topgate™ |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 500mW |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | AD549 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 700μA |
| Power Dissipation | 500mW |
| Quiescent Current | 700μA |
| Supply Current-Max | 0.7mA |
| Slew Rate | 3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 0.15pA |
| Voltage - Supply, Single/Dual (±) | ±5V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 2.5e-7μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 2.5e-7μA |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 90nV/sqrt Hz |
| Height | 4.7mm |
| Length | 9.4mm |
| Width | 9.4mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD549JHZ Datasheet
+8613715157867