ADA4004-2ARZ-R7 OverviewThere is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. 8 pins are located on the operational amplifiers. The input offset voltage is 125μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 4.4mA . It is recommended to keep the voltage gain at 112.04dB at all times. On the buffer amps, there are 2 channels that can be used. This linear amplifier pack is based on the TAPE AND REEL axis. Instrumentation amplifiers are numbered by their iPolar® series. 2.2mA quiescent currents are flowing through buffer op amp.
ADA4004-2ARZ-R7 Features8 Pins
supply voltage of 5V
112.04dB voltage gain
ADA4004-2ARZ-R7 ApplicationsThere are a lot of Analog Devices Inc.
ADA4004-2ARZ-R7 Instrumentational OP Amps applications.
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Factory Lead Time | 10 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | iPolar® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4004 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 4.4mA |
| Quiescent Current | 2.2mA |
| Slew Rate | 2.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 113 dB |
| Current - Input Bias | 40nA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 125μV |
| Gain Bandwidth Product | 12MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 112.04dB |
| Average Bias Current-Max (IIB) | 0.165μA |
| Power Supply Rejection Ratio (PSRR) | 118dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 40μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.09μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 1.8nV/sqrt Hz |
| Length | 4.9mm |
| Height Seated (Max) | 1.75mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4004-2ARZ-R7 Datasheet
+8613715157867