ADF4002BRUZ-RL OverviewAs a clock IC, it uses the Tape & Reel (TR) package. 16-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 16 terminations. For this clock generator ic, a voltage of 3V is required. This Clock PLL will be fed by CMOS, TTL as its input. Providing a maximum frequency of 400MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows this electrical component to be easily installed on the panel. For safety reasons, this frequency generator's supply voltage should remain above 2.7V. There are 2.7V~3.3V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with Clock logic levels. This is an electronic part that can be classified as a Clock/Frequency Synthesizer (RF), Phase Detector in this case. In particular, this clock PLL is designed to be used with microprocessors. ADF4002 is the base part number for finding related electronic parts. There is a 16 pin that is available on the frequency synthesizers. The maximum supply voltage that analog clock generator can handle is 3V. 1 signal outputs allow for maximi1ation of output frequency. This time clock generator requires a supply current of 5mA in order to operate properly. During normal operation, the maximum supply current should not exceed 6mA.
ADF4002BRUZ-RL FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3V
ADF4002BRUZ-RL ApplicationsThere are a lot of Analog Devices Inc.
ADF4002BRUZ-RL Clock Generators applications.
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Clock/Frequency Synthesizer (RF), Phase Detector |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4002 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3V |
| Power Supplies | 3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Frequency (Max) | 400MHz |
| Supply Current-Max (Isup) | 6mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/No |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4002BRUZ-RL Datasheet
+8613715157867