ADSP-BF561SKBCZ-5A OverviewAn electronic component available in package 256-BGA, CSPBGA.Tray packaging is provided for it.Its Fixed Point status makes it ideal for a wide range of applications.It is mounted in the direction of Surface Mount as shown in the image below.If it is operating at the temperature of 0°C~70°C TA, then it will be operating normally.This refers to the analog voltage range that can be input or output from 2.50V 3.30V.There are several digital signal processors in the Blackfin® series, including this one.In terms of its uses, it has 256 terminations.1.25V provides the supply voltage for it.The 256 component has pins.There are 256 pins in its configuration.The base part number ADSP-BF561 can be used to identify many associated parts.To operate at 500MHz frequency, the device has a specific design.Mounting is accomplished using Surface Mount.In this device, the minimum voltage is 800mV.It can be supplied with a maximum voltage of 1.375V.Its memory can be used to store 2B data.Timers and counters that measure time and count external events are also called 14 timers and counters.An architecture of Blackfin is adopted by this processor core.48 I/Os are included with the device.It uses the ROM memory type.The embedded system uses short-range 1 SPI channels for communication.A 12 PWM channel controls analog circuits with digital signals.
ADSP-BF561SKBCZ-5A FeaturesSupplied in the 256-BGA, CSPBGA package
14 timers/counters
48 I/Os
ADSP-BF561SKBCZ-5A ApplicationsThere are a lot of Analog Devices Inc.
ADSP-BF561SKBCZ-5A DSP applications.
Financial signals
Other sensor array processing
Spectral density estimation
Statistical signal processing
Digital image processing, data compression
Video coding, audio coding
Image compression
Signal processing for telecommunications
Control systems
Biomedical engineering
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA, CSPBGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.25V |
| Frequency | 500MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF561 |
| Pin Count | 256 |
| Interface | SPI, SSP, UART |
| Max Supply Voltage | 1.375V |
| Min Supply Voltage | 800mV |
| Memory Size | 2B |
| Number of I/O | 48 |
| RAM Size | 32kB |
| Memory Type | ROM |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 14 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Number of PWM Channels | 12 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.25V |
| On Chip Data RAM | 328kB |
| Number of SPI Channels | 1 |
| Clock Rate | 533MHz |
| Height | 1.31mm |
| Length | 12.1mm |
| Width | 12.1mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF561SKBCZ-5A Datasheet
+8613715157867