CDC2351QDBRG4 OverviewThere is a case available for the cut smart buffer in 24-SSOP (0.209, 5.30mm Width). This package is packaged in the form of a Tape & Reel (TR). For normal operation, 100MHz is the maximum value. It has 24 terminations in it, which means that it is terminated. Supply voltages of 3.3V are capable of achieving high efficiency. In this case, it will be mounted by Surface Mount. A classification of Fanout Buffer (Distribution) is assigned to this electronic part. Setting the temperature to -40°C~125°C will ensure reliable performance. Ideally, it should be able to operate from 3V~3.6V volts. It has been positioned in the way of Surface Mount. There are 24 pins on the clock buffer. During operation, 24 pins are used. As a member of the CDC2351 family, it falls under that category. Vsup is set to 3.6V as the maximum supply voltage. As a general rule, the supply voltage (Vsup) should be maintained above 3V. As a default, it is set to output 10. A electronic part of this series belongs to the Automotive, AEC-Q100 family. When the supply voltage is at 3.3V, the efficiency will be highest. The clock divider consumes 15mA quiescent current, and it is unaffected by external factors. This method employs the packing method of TR.
CDC2351QDBRG4 Features24 terminations
The operating temperature of -40°C~125°C degrees
CDC2351QDBRG4 ApplicationsThere are a lot of Texas Instruments
CDC2351QDBRG4 Clock Buffers & Drivers applications.
Clock signal format conversion
Clock signal level shifting
High performance communication system
Data center
Cloud computing
Network
High speed industry
High-end consumer electronics
Data communication
Telecommunications
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Factory Lead Time | 12 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Fanout Buffer (Distribution) |
| Packing Method | TR |
| Max Power Dissipation | 650mW |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CDC2351 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Nominal Supply Current | 7.85mA |
| Quiescent Current | 15mA |
| Frequency (Max) | 100MHz |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Input | LVTTL |
| Ratio - Input:Output | 1:10 |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 2.5 ns |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867