CDCVF2310PW Overview
24-TSSOP (0.173, 4.40mm Width) case is available for the cut smart buffer. In case Tube, the cut smart buffer is available. A total of 24 terminations have been found in it. The supply voltage of 2.5V is capable of providing high efficiency. If this is the case, it will be mounted as Surface Mount. This electronic part is classified as Fanout Buffer (Distribution). If you wish to ensure reliable performance, you should set the temperature to -40°C~85°C. In general, it should be able to work with a power source of 2.3V~3.6V volts. There is a place for it in the way of Surface Mount. On this board, there is a pin count of 24. In order for the timeing clock to operate, it is connected to the 24 pins. The structure belongs to the CDCVF2310 family of structures. The electronic gadget belongs to the CDC family. This value is set to 3.6V for the maximum available supply voltage (Vsup). A voltage higher than 2.3V is necessary for normal operation of the system. By default, the output of the circuit clock is set to 10. There is a 2.5/3.3V volt supply that powers the timeing clock. As long as the frequency is 200MHz, excellent accuracy can be achieved.
CDCVF2310PW Features
24 terminations
The operating temperature of -40°C~85°C degrees
at 200MHz frequency

CDCVF2310PW Applications
There are a lot of Texas Instruments
CDCVF2310PW Clock Buffers & Drivers applications.

Clock signal level shifting
High performance communication system
Data center
Cloud computing
Network
High speed industry
High-end consumer electronics
Data communication
Telecommunications
Computing

Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Factory Lead Time	6 Weeks
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-TSSOP (0.173, 4.40mm Width)
Number of Pins	24
Weight	89.499445mg
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Type	Fanout Buffer (Distribution)
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Frequency	200MHz
Base Part Number	CDCVF2310
Pin Count	24
Number of Outputs	10
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	2.5/3.3V
Supply Voltage-Min (Vsup)	2.3V
Number of Circuits	1
Nominal Supply Current	80μA
Propagation Delay	2.8 ns
Turn On Delay Time	3.5 ns
Family	CDC
Logic Function	Clock
Output Characteristics	3-STATE WITH SERIES RESISTOR
Input	LVTTL
Ratio - Input:Output	1:10
Differential - Input:Output	No/No
Input Current	5μA
Height	1.2mm
Length	7.8mm
Width	4.4mm
Thickness	1mm
REACH SVHC	No SVHC
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free