CENGLH7A400-10-403EC Overview
Microcontroller MPU Core is a module or board.A ARM922T, LH7A400-core processor drives microprocessor chip.Default settings for the microcontroller are 0°C~70°C.16MB is the size of the flash on the MCU electronics.The connector type is SO-DIMM-144.The RAM is reduced to 64MB in order to ensure that the software is able to run normally.200MHz speed is used by the MCU chip.200MHz frequency will not affect MCU chips accuracy.At this time, 70°C is the maximum operational temperature.Microprocessor should be warmer than 0°C when operating.Micro controller's core architecture is ARM.
CENGLH7A400-10-403EC Features
Core processor of ARM922T, LH7A400
Flash size of 16MB
Speed of 200MHz
Core architecture of ARM

CENGLH7A400-10-403EC Applications
There are a lot of Logic
CENGLH7A400-10-403EC Microcontroller, Microprocessor, FPGA Modules applications.

Industrial Instrumentation
Embedded Control Processing
Embedded User Interfaces
Test and Measurement
Medical Devices
Data Acquisition
Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring

Operating Temperature	0°C~70°C
Published	2004
Size / Dimension	2.37 x 2.67 60.2mmx67.8mm
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	Not Applicable
Connector Type	SO-DIMM-144
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Frequency	200MHz
Speed	200MHz
RAM Size	64MB
Core Processor	ARM922T, LH7A400
Core Architecture	ARM
Module/Board Type	MPU Core
Flash Size	16MB
Height	4.4mm
Length	60.2mm
Width	67.8mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead