CENGPXA270-520-10-504HC Overview
MCU Core is the type of module or board that is used in this microcontroller.Microprocessor chip is powered by a processor with a total of PXA270 cores in it.It is default for the microcontroller to set the mode to 0°C~70°C.There is a flash size 32MB on the MCU electronics.In this case, the connector type is SO-DIMM-144.This is done to make sure that the software is able to run normally and that the RAM size is reduced to 64MB.In this MCU chip, the speed is set to 520MHz.For as long as microprocessor continues to operate accurately at the 520MHz frequency, microprocessor will continue to function correctly.As of right now, 70°C is the maximum operational temperature at this time.Microprocessor should be warmer than 0°C when microprocessor is operating.
CENGPXA270-520-10-504HC Features
Core processor of PXA270
Flash size of 32MB
Speed of 520MHz

CENGPXA270-520-10-504HC Applications
There are a lot of Logic
CENGPXA270-520-10-504HC Microcontroller, Microprocessor, FPGA Modules applications.

Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface
Human Machine Control Panel
Home and Building Automation
Thermostat

Operating Temperature	0°C~70°C
Published	2005
Size / Dimension	2.37 x 2.67 60.2mmx67.8mm
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	Not Applicable
Connector Type	SO-DIMM-144
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Frequency	520MHz
Speed	520MHz
RAM Size	64MB
Core Processor	PXA270
Module/Board Type	MCU Core
Flash Size	32MB
Height	4.4mm
Length	60.2mm
Width	67.8mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead