CY23EP09ZXC-1H OverviewThis clock IC is packaged using the Tube method. The 16-TSSOP (0.173, 4.40mm Width) package includes this clock generator. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. In it, there are 16 terminations to be found. This time clock generator should be voltaged at 2.5V. A clock generator's input is called LVCMOS, LVTTL and it is designed as the input for this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 200MHz 220MHz is available. With the Surface Mount, it is easy to install this electric component on the panel. Clock generators can take up to 2.7V of power as a maximum supply voltageThis frequency synthesizer requires a supply voltage above 2.3V to be safe. This clock PLL works with a supply voltage of 2.5V 3.3V. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. A Fanout Buffer (Distribution), Zero Delay Buffer is a classification for the electronic part in question. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. This part number CY23EP09 is related to the following electrical components. PF synthesizers is equipped with 16 pins. PLL clock can handle a voltage of 3.3V as its supply voltage. The frequency generator has a ALSO OPERATES AT 3.3V SUPPLY feature to improve the output of clock signals. Clock PLL has 9 signal outputs to maximi9e output frequency.
CY23EP09ZXC-1H FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY23EP09ZXC-1H ApplicationsThere are a lot of Cypress Semiconductor Corp
CY23EP09ZXC-1H Clock Generators applications.
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
| Factory Lead Time | 7 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23EP09 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 200MHz 220MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 4.4 ns |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867