CY7B994V-5BBXC OverviewIt is packaged using the Tray method since it is a clock IC. Embedded in the 100-LBGA package is this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. It contains a total of 100 terminations within RF synthesizer. This clock generator ic should receive a voltage of 3.3V. It is designed that the Clock PLL's input should be LVPECL, LVTTL. A total of 1 circuits are implemented to access the full performance of the electrical part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 200MHz. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock PLL is capable of receiving a maximum of 3.63V as a supply voltage. There should be a voltage supply above 2.97V for this frequency generator in order to ensure its safety. As long as you provide 2.97V~3.63V supply voltage, it will work. Using the test statistics, we estimate that the ambient temperature should be 0°C~70°C. The RF synthesizer is compatible with LVTTL logic levels. An electrical part such as this one can be classified as a Clock Buffer, Fanout Distribution component. In this IC, a 100-bit frequency generator is designed specifically for use in microprocessors. This part number is related to its related electronic parts. There are a number of 100 pins that are available on the clock generators. There is a maximum supply voltage of 3.3V that frequency generators can handle. A frequency synthesizer with CONFIGURABLE AS SINGLE ENDED TTL ALSO features better clock signal output. An electronic part belonging to the RoboClock™ series is being used here. Low timing skew is provided by this analog clock generator at maximum 0.65 ns. When searching for parts belonging to the 7B family, similar electric components can be found.
CY7B994V-5BBXC FeaturesAvailable in the 100-LBGA
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-5BBXC ApplicationsThere are a lot of Cypress Semiconductor Corp
CY7B994V-5BBXC Clock Generators applications.
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
Media broadcast servers
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LBGA |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | RoboClock™ |
| Published | 2003 |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 5 (48 Hours) |
| Number of Terminations | 100 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY7B994 |
| Output | LVTTL |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 250mA |
| Frequency (Max) | 200MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.5 ns |
| Propagation Delay (tpd) | 0.5 ns |
| Divider/Multiplier | Yes/Yes |
| fmax-Min | 200 MHz |
| Same Edge Skew-Max (tskwd) | 0.65 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B994V-5BBXC Datasheet
+8613715157867