DC-ME-Y413-S Overview
MPU Core is the type of module or board that is used in this microcontroller.Microprocessor chip is powered by a processor with a total of ARM926EJ-S, NS9210 cores in it.It is default for the microcontroller to set the mode to -40°C~80°C.There is a flash size 16MB on the MCU electronics.In this case, the connector type is RJ45.There are two versions of this microcontrollers in the Digi Connect ME® Series.This is done to make sure that the software is able to run normally and that the RAM size is reduced to 8MB.For as long as microprocessor continues to operate accurately at the 75MHz frequency, microprocessor will continue to function correctly.In the program, there is a structure called ARM.
DC-ME-Y413-S Features
Core processor of ARM926EJ-S, NS9210
Flash size of 16MB
Core architecture of ARM

DC-ME-Y413-S Applications
There are a lot of Digi
DC-ME-Y413-S Microcontroller, Microprocessor, FPGA Modules applications.

Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface
Human Machine Control Panel
Home and Building Automation
Thermostat

Operating Temperature	-40°C~80°C
Series	Digi Connect ME®
Published	2012
Size / Dimension	1.45 x 0.75 36.7mmx19.1mm
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Connector Type	RJ45
Frequency	75MHz
RAM Size	8MB
Core Processor	ARM926EJ-S, NS9210
Core Architecture	ARM
Module/Board Type	MPU Core
Flash Size	16MB
RoHS Status	RoHS Compliant