Add to cart |
The LMC6482AIM is an Operational Amplifier IC that provides a common-mode range that extends to both supply rails. This rail-to-rail performance combined with excellent accuracy, due to a high CMRR, makes it unique among rail-to-rail input amplifiers. The LMC6482AIM Amplifier is ideal for systems, such as data acquisition, that require a large input signal range. The LMC6482AIM is also an excellent upgrade for circuits using limited common-mode range amplifiers such as the TLC272 and TLC277. The maximum dynamic signal range is assured in low voltage and single supply systems by the rail-to-rail output swing of the LMC6482AIM.
Typical Unless Otherwise Noted
Rail-to-rail Input Common-mode Voltage Range (Ensured Over Temperature)
Rail-to-rail Output Swing (Within 20mV of Supply Rail, 100kR Load)
Ensured 3, 5, and 15V Performance
82dB Excellent CMRR and PSRR
20fA Ultralow Input Current
130dB High Voltage Gain (R L = 500kR) Specified for 2kR and 600R Loads
Power-good Output
Green Product, No Sb/Br
Oscilloscope (DSO)
Data acquisition (DAQ)
Currency counter
Macro remote radio unit (RRU)
Multiparameter patient monitor
Intra-DC interconnect (METRO)
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMC6482 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/15V |
| Number of Channels | 2 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1.3mA |
| Output Current | 30mA |
| Slew Rate | 1.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 0.02pA |
| Voltage - Supply, Single/Dual (±) | 3V~15.5V ±1.5V~7.75V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 750μV |
| Bandwidth | 1.5MHz |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 116.47dB |
| Average Bias Current-Max (IIB) | 0.000004μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 110μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000004μA |
| Programmable Power | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMC6482AIM Datasheet
+8613715157867