OPA4141AIPW OverviewIt is packaged in an 14-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a J-FET-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 18V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 3.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 1.8mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 126dB. There are a total of 4 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 18V.
OPA4141AIPW Features14 Pins
supply voltage of 18V
126dB voltage gain
Output Type: Rail-to-Rail
OPA4141AIPW ApplicationsThere are a lot of Texas Instruments
OPA4141AIPW Instrumentational OP Amps applications.
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 18V |
| Base Part Number | OPA4141 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Channels | 4 |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 2.3mA |
| Output Current | 36mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 36mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -18V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 126dB |
| Average Bias Current-Max (IIB) | 0.00002μA |
| Power Supply Rejection Ratio (PSRR) | 137.07dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 1MHz |
| Bias Current-Max (IIB) @25C | 0.00002μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 3.5mV |
| Input Offset Current-Max (IIO) | 0.001μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA4141AIPW Datasheet
+8613715157867