The high-performance ARM?Cortex?-M3 32-bit RISC core that runs at a frequency of up to 120 MHz is the foundation of the STM32F21x family. The family has a wide range of upgraded I/Os and peripherals connected to two APB buses, three AHB buses, and a 32-bit multi-AHB bus matrix, along with high-speed embedded memories (Flash memory up to 1 Mbyte, up to 128 Kbytes of system SRAM, up to 4 Kbytes of backup SRAM).

The devices additionally include an adaptive real-time memory accelerator (ART AcceleratorTM), which enables program execution from Flash memory with performance similar to zero wait states at CPU frequencies up to 120 MHz. The CoreMark? benchmark has been used to certify this performance. STM32F215ZET6 features two general-purpose 32-bit timers, three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers, and two PWM timers for motor control. a real random number generator (RNG). They also have both conventional and cutting-edge communication interfaces. An SDIO, an improved flexible static memory control (FSMC) interface (for products provided in packages of 100 pins and more), a cryptographic acceleration cell, and a camera interface for CMOS sensors are examples of new sophisticated peripherals. Standard peripherals are also included with the devices.

• 2 × 12-bit D/A converters

  
  

• 3 × 12-bit, 0.5 μs ADCs with up to 24 channels and up to 6 MSPS in triple interleaved mode

  
  

• General-purpose DMA: 16-stream controller with centralized FIFOs and burst support

  
  

• Debug mode: Serial wire debug (SWD), JTAG, and Cortex?-M3 Embedded Trace Macrocell?

  
  

• Core: ARM? 32-bit Cortex?-M3 CPU (120 MHz max) with Adaptive real-time accelerator (ART Accelerator?) allowing 0-wait state execution performance from Flash memory, MPU, 150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)

  
  

  
  

  
  

  STM32F215ZET6 Applications

  
  

  • Automotive

    
    

  • Personal electronics

    
    

  • Communications equipment

    
    

    
    

    Lifecycle Status	ACTIVE (Last Updated: 7 months ago)
    Factory Lead Time	12 Weeks
    Mounting Type	Surface Mount
    Package / Case	144-LQFP
    Surface Mount	YES
    Number of Pins	144
    Operating Temperature	-40°C~85°C TA
    Packaging	Tray
    Series	STM32F2
    JESD-609 Code	e3
    Part Status	Active
    Moisture Sensitivity Level (MSL)	3 (168 Hours)
    Number of Terminations	144
    Terminal Finish	Matte Tin (Sn) - annealed
    Max Power Dissipation	500mW
    Terminal Position	QUAD
    Terminal Form	GULL WING
    Supply Voltage	2.7V
    Terminal Pitch	0.5mm
    Frequency	120MHz
    Base Part Number	STM32F215
    Pin Count	144
    Supply Voltage-Min (Vsup)	1.8V
    Interface	CAN, I2C, I2S, SPI, UART, USART, USB
    Memory Size	512kB
    Oscillator Type	Internal
    Number of I/O	114
    RAM Size	132K x 8
    Voltage - Supply (Vcc/Vdd)	1.8V~3.6V
    uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC
    Core Processor	ARM® Cortex®-M3
    Peripherals	Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT
    Program Memory Type	FLASH
    Core Size	32-Bit
    Program Memory Size	512KB 512K x 8
    Connectivity	CANbus, I2C, IrDA, LINbus, MMC, SPI, UART/USART, USB OTG
    Supply Current-Max	81mA
    Bit Size	32
    Data Converter	A/D 24x12b; D/A 2x12b
    Watchdog Timer	Yes
    Has ADC	YES
    DMA Channels	YES
    Data Bus Width	32b
    Number of Timers/Counters	14
    Core Architecture	ARM
    Number of UART Channels	2
    Number of ADC Channels	24
    Number of PWM Channels	6
    Number of I2C Channels	3
    Height	1.45mm
    Length	20.2mm
    Width	20.2mm
    REACH SVHC	No SVHC
    Radiation Hardening	No
    RoHS Status	ROHS3 Compliant
    Lead Free	Lead Free