TSV732IST Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Cut Tape (CT) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. This linear amplifier should be powered by an 1.8V battery. The op amp ic has an array of 8 pins on it. Op amp rates 200μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 60μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 105dB for the time being. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. 2 elements make up the design of this buffer amplifier.
TSV732IST Features
supply voltage of 1.8V
105dB voltage gain
Output Type: Rail-to-Rail

TSV732IST Applications
There are a lot of STMicroelectronics
TSV732IST Instrumentational OP Amps applications.

Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards

Lifecycle Status	ACTIVE (Last Updated: 6 months ago)
Factory Lead Time	20 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Cut Tape (CT)
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.65mm
Base Part Number	TSV732
Output Type	Rail-to-Rail
Number of Elements	2
Operating Supply Current	60μA
Nominal Supply Current	59μA
Slew Rate	0.35V/μs
Amplifier Type	General Purpose
Common Mode Rejection Ratio	66 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	1.5V~5.5V
Output Current per Channel	68mA
Input Offset Voltage (Vos)	200μV
Gain Bandwidth Product	900kHz
Unity Gain BW-Nom	850 kHz
Voltage Gain	105dB
Average Bias Current-Max (IIB)	0.0003μA
Supply Voltage Limit-Max	6V
Input Voltage Noise Density	35nV/sqrt Hz
Length	3mm
Height Seated (Max)	1.1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant