TSV991ILT Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 5 terminations this year. A total of 5 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 3.3V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 4.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 820μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 91dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are 1 elements in this buffer amplifier. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design.
TSV991ILT Features
5 Pins
supply voltage of 3.3V
91dB voltage gain
Output Type: Rail-to-Rail

TSV991ILT Applications
There are a lot of STMicroelectronics
TSV991ILT Instrumentational OP Amps applications.

Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering

Lifecycle Status	ACTIVE (Last Updated: 7 months ago)
Factory Lead Time	14 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Packing Method	TAPE AND REEL
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	3.3V
Base Part Number	TSV991
Pin Count	5
Output Type	Rail-to-Rail
Number of Elements	1
Operating Supply Current	820μA
Nominal Supply Current	1.1mA
Output Current	35mA
Slew Rate	10V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	62 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.5V~5.5V
Output Current per Channel	35mA
Input Offset Voltage (Vos)	4.5mV
Bandwidth	20MHz
Unity Gain BW-Nom	20000 kHz
Voltage Gain	91dB
Power Supply Rejection Ratio (PSRR)	86dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	100μV
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Height	1.05mm
Length	2.9mm
Width	1.6mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free