UCC5606PWPTR Overview
A 9 termination consists of terminating transmission lines with a device matching the line's characteristic impedance. The 24-TSSOP (0.173, 4.40mm Width) Exposed Pad is well known in the electronic industry due to its low package cost. The Packaging follows Tape & Reel (TR)'s materials. Mounting it on a PCB is done with Surface Mount. It is recommended that the Operating Temperature not exceed 0°C~70°C. It is a SCSI-qualified material for standard applications. There is a 2.7V~5.25V Supply Voltage provided to ensure normal operation. For finding related parts, you can use Base Part Number UCC5606. It is intended to use the 24 pins for a specific purpose. There are 9 signal lines, which mean those lines for public or private signal or communication service and devoted exclusively to the transmission of signals or intelligence. The Supply Voltage should be maintained at 3.3V for high efficiency. There is a Surface Mount-mount on it. Computers and other communications devices use 24 pins, which are pronged contacts. In order to operate, 3.3V Power Supplies are required. Resistance is a measure of the opposition to current flow in an electrical circuit.  The resistance of this electrical device is 110Ohm (Ω).
UCC5606PWPTR Features
9 terminations
Tape & Reel (TR) package
UCC5606 family
24 pin count
9 signal lines
24 pins
3.3V power supplies

UCC5606PWPTR Applications
There are a lot of Texas Instruments
UCC5606PWPTR Signal Terminators applications.

Data Networking
CSU and DSU
Data Routers
Programmable logic controller
Remote input module
Data Networking
PCI Cards
Telecommunication Equipment
Data Routers
Data Switches

Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-TSSOP (0.173, 4.40mm Width) Exposed Pad
Number of Pins	24
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	9
Type	SCSI
Resistance	110Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Voltage - Supply	2.7V~5.25V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.65mm
Base Part Number	UCC5606
Pin Count	24
Power Supplies	3.3V
Nominal Supply Current	218mA
Differential Output	NO
Number of Signal Lines	9
Pull-up Resistance-Nom	110Ohm
Height	1.2mm
Length	7.8mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free