UCC5618DWP OverviewIt is possible to terminate a transmission line with a device matching the impedance of the line, which is known as 18 termination. A well-known feature of the 28-SOIC (0.295, 7.50mm Width) is its low packaging cost. Materials used for packaging are the same as those used by Tube. The PCB is mounted using Surface Mount. It is recommended that the Operating Temperature does not exceed 0°C~70°C. Standard applications can be carried out with this SCSI-qualified material. Base Part Number UCC5618 is useful for finding related parts. There are specific uses for the 28 pins. A 18 signal line is one that is exclusively used for transmitting signals or intelligence, or for public or private communication. Optimal efficiency requires a supply voltage of 4.75V. On it is a Surface Mount-mount. It is common for computers and other communication devices to use pronged contacts, called 28 pins. It is necessary to have 4.75V Power Supplies in order for the system to operate. Its resistance is 110Ohm (Ω). As the device can operate at supply voltages of 420mA, it is suitable for a wide range of applications. The system runs on a voltage of 4V as its minimum supply voltage. Voltage is maximum when 5.25V is maximal. In this electronic part, up to 1 eligible receivers/drivers can be connected at the same time.
UCC5618DWP Features18 terminations
Tube package
UCC5618 family
28 pin count
18 signal lines
28 pins
4.75V power supplies
UCC5618DWP ApplicationsThere are a lot of Texas Instruments
UCC5618DWP Signal Terminators applications.
Data Routers
Programmable logic controller
Remote input module
Data Networking
PCI Cards
Telecommunication Equipment
Data Routers
Data Switches
Programmable logic controller and remote input modules
High speed protected termination for digital input with serialized SPI output
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 792.000628mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Type | SCSI |
| Resistance | 110Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Base Part Number | UCC5618 |
| Pin Count | 28 |
| Power Supplies | 4.75V |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 420mA |
| Nominal Supply Current | 440mA |
| Differential Output | NO |
| Number of Drivers | 1 |
| Number of Signal Lines | 18 |
| Pull-up Resistance-Nom | 110Ohm |
| Height | 2.35mm |
| Length | 18mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Surface Mount | YES |
| Pbfree Code | yes |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G28 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4V |
| Length | 17.905mm |
| Height Seated (Max) | 2.64mm |
| Width | 7.5mm |
UCC5618DWP Datasheet
+8613715157867