XP1001000M-05R Overview
MPU Core is the type of module or board that is used in this microcontroller.Microprocessor chip is powered by a processor with a total of DSTni-EX cores in it.It is default for the microcontroller to set the mode to -40°C~85°C.There is a flash size 512KB on the MCU electronics.In this case, the connector type is RJ45.There are two versions of this microcontrollers in the XPort® Series.This is done to make sure that the software is able to run normally and that the RAM size is reduced to 256KB.In this MCU chip, the speed is set to 25MHz.The package has the Module extension.As of right now, 85°C is the maximum operational temperature at this time.Microprocessor should be warmer than -40°C when microprocessor is operating.An Intel XPort AR Core Processor is at the heart of this MCUs.This microcontrollers operates on a 3.3V volt supply which is the voltage of the operating supply.The product is packaged in a Bulk-size package.
XP1001000M-05R Features
Core processor of DSTni-EX
Flash size of 512KB
Speed of 25MHz
Bulk packaging

XP1001000M-05R Applications
There are a lot of Lantronix, Inc.
XP1001000M-05R Microcontroller, Microprocessor, FPGA Modules applications.

Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface
Human Machine Control Panel
Home and Building Automation
Thermostat

Factory Lead Time	6 Weeks
Package / Case	Module
Operating Temperature	-40°C~85°C
Packaging	Bulk
Series	XPort®
Published	2011
Size / Dimension	0.57 x 0.72 14.5mmx18.3mm
Part Status	Active
Moisture Sensitivity Level (MSL)	Not Applicable
Connector Type	RJ45
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Operating Supply Voltage	3.3V
Interface	Ethernet
Speed	25MHz
RAM Size	256KB
Core Processor	DSTni-EX
Data Rate	921.6 kbps
Module/Board Type	MPU Core
Flash Size	512KB
Co-Processor	XPort AR
Height	13.5mm
Length	33.9mm
Width	16.25mm
RoHS Status	ROHS3 Compliant