XR16L784IV-F OverviewThere is a cost-effective 64-LQFP package available for this product.The transmission of data takes place over 4, QUART channels.For packaging purposes, Tray is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 64 terminations.For its operation, it requires a supply voltage of 3.3V.At present, this electronic part has a status of Active.Data is communicated via 4 serial I/Os.Mounting it through Surface Mount is possible.During operation, the supply voltage is set to 2.97V~5.5V.There is 50MHz clock frequency measured on this IC.There are some characteristics of Internal Oscillator, Timer/Counter that it possesses.85°C is the maximum temperature that it can operate at.Furthermore, it has the ability to perform ALSO OPERATES AT 5V SUPPLY as well.A minimum of -40°C is required for operation.Supply currents at 5mA are considered acceptable.
XR16L784IV-F Features4 serial I/Os
Clock frequency of 50MHz
ALSO OPERATES AT 5V SUPPLY
XR16L784IV-F ApplicationsThere are a lot of MaxLinear, Inc.
XR16L784IV-F UARTs applications.
Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
Factory Lead Time | 16 Weeks |
Mounting Type | Surface Mount |
Package / Case | 64-LQFP |
Surface Mount | YES |
Packaging | Tray |
JESD-609 Code | e3 |
Feature | Internal Oscillator, Timer/Counter |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 64 |
ECCN Code | 5A991 |
Terminal Finish | Matte Tin (Sn) |
Additional Feature | ALSO OPERATES AT 5V SUPPLY |
HTS Code | 8542.31.00.01 |
Voltage - Supply | 2.97V~5.5V |
Terminal Position | QUAD |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Supply Voltage | 3.3V |
Terminal Pitch | 0.5mm |
Time@Peak Reflow Temperature-Max (s) | 40 |
JESD-30 Code | S-PQFP-G64 |
Qualification Status | Not Qualified |
Operating Temperature (Max) | 85°C |
Operating Temperature (Min) | -40°C |
Temperature Grade | INDUSTRIAL |
Number of Channels | 4, QUART |
uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
Clock Frequency | 50MHz |
Supply Current-Max | 5mA |
Address Bus Width | 8 |
Protocol | RS485 |
Boundary Scan | NO |
Low Power Mode | YES |
External Data Bus Width | 8 |
Data Rate (Max) | 6.25Mbps |
Number of Serial I/Os | 4 |
Data Transfer Rate-Max | 0.78125 MBps |
Data Encoding/Decoding Method | NRZ |
FIFO's | 64 Byte |
With False Start Bit Detection | Yes |
Length | 10mm |
Height Seated (Max) | 1.6mm |
Width | 10mm |
RoHS Status | RoHS Compliant |