101-1051 Overview
MPU Core is the type of module or board that is used in this microcontroller.Microprocessor chip is powered by a processor with a total of Rabbit 3000 cores in it.It is default for the microcontroller to set the mode to 0°C~70°C.There is a flash size 512KB Internal 32MB External on the MCU electronics.In this case, the connector type is 2 IDC Headers 2x17, 1 IDC Header 2x5. 1 xD-Picture Card.There are two versions of this microcontrollers in the RabbitCore® Series.This is done to make sure that the software is able to run normally and that the RAM size is reduced to 1MB.In this MCU chip, the speed is set to 44.2MHz.
101-1051 Features
Core processor of Rabbit 3000
Flash size of 512KB Internal 32MB External
Speed of 44.2MHz

101-1051 Applications
There are a lot of Digi
101-1051 Microcontroller, Microprocessor, FPGA Modules applications.

Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface
Human Machine Control Panel
Home and Building Automation
Thermostat

Operating Temperature	0°C~70°C
Series	RabbitCore®
Published	2008
Size / Dimension	1.85 x 2.73 47mmx69mm
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Connector Type	2 IDC Headers 2x17, 1 IDC Header 2x5. 1 xD-Picture Card
Speed	44.2MHz
RAM Size	1MB
Core Processor	Rabbit 3000
Module/Board Type	MPU Core
Flash Size	512KB Internal 32MB External
RoHS Status	Non-RoHS Compliant