74FCT162501ATPAG8 Overview
As part of the TSSOP package, it is embedded. Tape and Reel is the way it is packaged. In 56 terminations, the transmission line is terminated with a device matching its characteristic impedance. It is recommended that the supply voltage be kept above 5V for normal operation. There are 56 pins on it. The electronic part was designed using 18 Bits. 2 terminations, on the other hand, are the practice of terminating a transmission line with a device that matches its characteristic impedance. Surface Mount is used to mount this electronic part. 56 pins are used in its design. The device belongs to the FCT family of electronic devices. Power is provided by 5V power supplies. There are 1 elements in it. It is configured with a trigger that uses POSITIVE EDGE. Channel number is growing strongly/weakly: 18. 5V is the supply voltage for this electrical part. The device consumes 5μA of quiescent current without being affected by external factors. With a minimal supply voltage of 4.5V, it operates. 5.5V's maximum supply voltage is supported by it. In this case, 24mA represents the high level output current. -40°C should be higher than the operating temperature. It is recommended that the operating temperature be lower than 85°C.
74FCT162501ATPAG8 Features
TSSOP package
56 pin count
56 pins
5V power supplies
1 elements

74FCT162501ATPAG8 Applications
There are a lot of Integrated Device Technology (IDT)
74FCT162501ATPAG8 Universal Bus Functions applications.

Test and Measurement
Wearable Health and Fitness Devices
Tablets
Industrial Controls
Telecommunications
Instrumentation Systems
Air conditioner
Home theater
Electric grinding wheel
Electrical tools

Contact Plating	Tin
Mount	Surface Mount
Package / Case	TSSOP
Number of Pins	56
Packaging	Tape and Reel
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	56
ECCN Code	EAR99
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Pin Count	56
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Number of Elements	1
Polarity	Non-Inverting
Power Supplies	5V
Temperature Grade	INDUSTRIAL
Number of Channels	18
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Number of Ports	2
Number of Bits	18
Propagation Delay	6 ns
Quiescent Current	5μA
Family	FCT
Logic Function	Transceiver
Direction	Bidirectional
Output Characteristics	3-STATE WITH SERIES RESISTOR
Max I(ol)	0.024 A
Trigger Type	POSITIVE EDGE
High Level Output Current	24mA
Low Level Output Current	24mA
Control Type	INDEPENDENT CONTROL
Translation	N/A
Length	14mm
Width	6.1mm
Thickness	1mm
RoHS Status	RoHS Compliant
Lead Free	Lead Free