74HC299DB,112 Overview
The package 20-SSOP (0.209, 5.30mm Width) contains this file embedded in it. I have packaged it in a way that is similar to Tube's. A 8-Bit circuit is used for achieving its superior flexibility as a result of its use of 8-Bit circuits. As far as the logic type of this electrical device is concerned, it is Universal Shift Register. I have mounted this electronic part in the way of Surface Mount in this way. It is recommended that the operating temperature be higher than -40°C~125°C. In addition, 6mA 6mA features the highest level of flexibility in its design due to its high and low output currents. An FPGA belonging to the 74HC series is a type of FPGA. There is a supply voltage of 2V~6V that it operates on. 74HC299 family is the family in which it belongs. It is possible to use 20 terminations, which are the ends of a transmission line which should be connected to a device whose characteristic impedance matches that of the transmission line. For normal operation, the supply voltage must be kept above 5V in order for the device to function properly. In addition, it is equipped with a 20 pin count. In order to design this electronic part, 8 Bits have been used. In this case, the electronic part is mounted in the direction of Surface Mount. 20 pins are used in the design of this board. The electronic device in question belongs to the HC/UH family of electronic devices. Upon reaching 6V, the maximum supply voltage (Vsup) is reached. It is recommended that the supply voltage (Vsup) should be greater than 2V. In this case, it is made up of 1 elements. It is configured with a trigger that uses a POSITIVE EDGE-value. There is also another characteristic of it that has to do with HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. There is a supply voltage of 5V that is used to power this electrical part. As part of the switching power supply, there is a line called the 10 input line, which consists of an electronic circuit that is connected between the ac mains and the rectifier input stage of the switching power supply.
74HC299DB,112 Features
20-SSOP (0.209, 5.30mm Width) package
74HC series
74HC299 family
20 pin count
20 pins
1 elements

74HC299DB,112 Applications
There are a lot of Nexperia USA Inc.
74HC299DB,112 Universal Bus Functions applications.

Air conditioner
Home theater
Electric grinding wheel
Electrical tools
Sewing machine
DVD
VCD
Computer
Television
Washing machine

Factory Lead Time	13 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SSOP (0.209, 5.30mm Width)
Number of Pins	20
Operating Temperature	-40°C~125°C
Packaging	Tube
Series	74HC
Published	2010
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL
Voltage - Supply	2V~6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	74HC299
Pin Count	20
Operating Supply Voltage	5V
Number of Elements	1
Supply Voltage-Max (Vsup)	6V
Supply Voltage-Min (Vsup)	2V
Number of Circuits	8-Bit
Load Capacitance	50pF
Number of Bits	8
Propagation Delay	34 ns
Turn On Delay Time	300 ns
Family	HC/UH
Logic Function	Shift Register
Direction	Bidirectional
Output Characteristics	3-STATE
Current - Output High, Low	6mA 6mA
Logic Type	Universal Shift Register
Output Polarity	TRUE
Trigger Type	POSITIVE EDGE
Number of Input Lines	10
Length	7.2mm
Height Seated (Max)	2mm
Width	5.3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant