95V2F857AHLFT OverviewYou can find it in the package Tape & Reel (TR). A 56-VFBGA-serial number is attached to the packaging of this product, which is packaged in a case. There is a recommended mounting type of Surface Mount. Clock program has 56 terminations. Parts with 2.5V voltage are provided by the part. Run 260 using the peak reflow temperature of this part. A device with 1 has been detected. normaloperation is restricted to 233MHz frequency. 0°C ~ 85°C can operate at a variety of temperatures. The component can provide a voltage of 2.3 V ~ 2.7 V. In this component, Memory, DDR is the primary function. The output is set to SSTL-2. 2005 parts of this part have been published. The base part number ICS95V2F857 is the place where you can start your search for information. The Surface Mount mount is recommended. 56 pins are present on the device. There are 56 pins 56 this board. Temperatures below 0°C cannot be used for this device. Circuits application is recommended to operate at a temperature lower than 85°C. Ensure that the supply voltage is set to 2.5V. In this case, -- refers to the series of the part. As far as supply voltage is concerned, this part is used at 2.7V. For the device to maintain a supply voltage above 2.3V. You can search for parts associated with the 95V family based on the part number. This device uses a type PLL BASED CLOCK DRIVER logic IC. 56-CABGA (4.5x7.0) is the company's choice of device package supplier.
95V2F857AHLFT FeaturesMounting Type: Surface Mount
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
run the output at th range of SSTL-2
with 56 Pins
operate supply voltage at the range of 2.5V
Logic IC Type: PLL BASED CLOCK DRIVER
95V2F857AHLFT ApplicationsThere are a lot of Integrated Device Technology (IDT)
95V2F857AHLFT application specific timer applications.
Broadcast video/audio timing
Processor and FPGA clocking
Any-frequency clock conversion
MSAN/DSLAM/PON
Fibre Channel, SAN
Telecom line cards
1 GbE and 10 GbE
Servers, Storage, Search Acceleration
Ethernet Switches, Routers
Small Cells, Mobile Backhaul/Fronthaul
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Supplier Device Package | 56-CABGA (4.5x7.0) |
| Frequency - Max | 233MHz |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Operating Temperature | 0°C ~ 85°C |
| Series | -- |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 2.3 V ~ 2.7 V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ICS95V2F857 |
| Output | SSTL-2 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | OTHER |
| Number of Circuits | 1 |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Nominal Supply Current | 175mA |
| Frequency (Max) | 233MHz |
| Family | 95V |
| Output Characteristics | 3-STATE |
| Input | LVCMOS |
| Ratio - Input:Output | 1:10 |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Main Purpose | Memory, DDR |
| fmax-Min | 220 MHz |
| Same Edge Skew-Max (tskwd) | 0.04 ns |
| Number of True Outputs | 10 |
| Length | 7mm |
| Width | 4.5mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
95V2F857AHLFT Datasheet
+8613715157867