95V857AHLF OverviewClock program has 56 terminations. Parts with 2.5V voltage are provided by the part. Run 260 using the peak reflow temperature of this part. A device with 1 has been detected. normaloperation is restricted to 233MHz frequency. 2008 parts of this part have been published. The Surface Mount mount is recommended. 56 pins are present on the device. There are 56 pins 56 this board. Temperatures below 0°C cannot be used for this device. Circuits application is recommended to operate at a temperature lower than 85°C. Ensure that the supply voltage is set to 2.5V. As far as supply voltage is concerned, this part is used at 2.7V. For the device to maintain a supply voltage above 2.3V. You can search for parts associated with the 95V family based on the part number.
95V857AHLF FeaturesPeak Reflow Temperature (Cel): 260
Include 1 Circuits
with 56 Pins
operate supply voltage at the range of 2.5V
95V857AHLF ApplicationsThere are a lot of Integrated Device Technology (IDT)
95V857AHLF application specific timer applications.
Broadcast video/audio timing
Processor and FPGA clocking
Any-frequency clock conversion
MSAN/DSLAM/PON
Fibre Channel, SAN
Telecom line cards
1 GbE and 10 GbE
Servers, Storage, Search Acceleration
Ethernet Switches, Routers
Small Cells, Mobile Backhaul/Fronthaul
| Factory Lead Time | 7 Weeks |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Number of Pins | 56 |
| Published | 2008 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | OTHER |
| Number of Circuits | 1 |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Nominal Supply Current | 170mA |
| Frequency (Max) | 233MHz |
| Family | 95V |
| Output Characteristics | 3-STATE |
| Input | Clock |
| PLL | Yes |
| Same Edge Skew-Max (tskwd) | 0.04 ns |
| Number of True Outputs | 20 |
| Length | 7mm |
| Width | 4.5mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Supplier Device Package | 56-CABGA (4.5x7.0) |
| Operating Temperature | 0°C~85°C |
| Packaging | Tray |
| Part Status | Obsolete |
| Voltage - Supply | 2.3V~2.7V |
| Base Part Number | ICS95V857 |
| Output | SSTL-2 |
| Ratio - Input:Output | 1:10 |
| Differential - Input:Output | Yes/Yes |
| Main Purpose | Memory, DDR |
95V857AHLF Datasheet
+8613715157867