9DB803DFLFT OverviewYou can find it in the package Cut Tape. A SSOP-serial number is attached to the packaging of this product, which is packaged in a case. Clock program has 48 terminations. Parts with 3.3V voltage are provided by the part. Run 260 using the peak reflow temperature of this part. A device with 1 has been detected. normaloperation is restricted to 400MHz frequency. 2006 parts of this part have been published. The Surface Mount mount is recommended. 48 pins are present on the device. There are 48 pins 48 this board. Temperatures below 0°C cannot be used for this device. Circuits application is recommended to operate at a temperature lower than 70°C. Ensure that the supply voltage is set to 3.3V. In this case, it is possible for the device to maintain 8 outputs. As far as supply voltage is concerned, this part is used at 3.465V. For the device to maintain a supply voltage above 3.135V. You can search for parts associated with the 9DB family based on the part number. This device uses a type PLL BASED CLOCK DRIVER logic IC.
9DB803DFLFT FeaturesPeak Reflow Temperature (Cel): 260
Include 1 Circuits
with 48 Pins
operate supply voltage at the range of 3.3V
Logic IC Type: PLL BASED CLOCK DRIVER
9DB803DFLFT ApplicationsThere are a lot of Integrated Device Technology (IDT)
9DB803DFLFT application specific timer applications.
Broadcast video/audio timing
Processor and FPGA clocking
Any-frequency clock conversion
MSAN/DSLAM/PON
Fibre Channel, SAN
Telecom line cards
1 GbE and 10 GbE
Servers, Storage, Search Acceleration
Ethernet Switches, Routers
Small Cells, Mobile Backhaul/Fronthaul
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Packaging | Cut Tape |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.465V |
| Min Supply Voltage | 3.135V |
| Nominal Supply Current | 190mA |
| Frequency (Max) | 400MHz |
| Family | 9DB |
| Output Characteristics | 3-STATE |
| Input | HCSL |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 12 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Supplier Device Package | 48-SSOP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Voltage - Supply | 3.135V~3.465V |
| Base Part Number | ICS9DB803 |
| Output | HCSL |
| Ratio - Input:Output | 1:8 |
| Differential - Input:Output | Yes/Yes |
| Main Purpose | PCI Express (PCIe) |
| RoHS Status | ROHS3 Compliant |
9DB803DFLFT Datasheet
+8613715157867