9FGU0841AKILF Overview
In it, there are 48 terminations. Clock program provides 1.5V volts. In order to run 260, the peak reflow temperature of this part is taken into account. Clock program contains a total of CLOCK GENERATOR, PROCESSOR SPECIFIC peripheral ICs, uPs, and uCs. The device contains 1. In normaloperation, the maximum frequency is 100MHz. Using this device, CONFIGURATION CAN BE ACCOMPLISHED W/T STRAPPING PINS, SMBUS NOT REQUIRED FOR DEVICE CONTROL can also be founded. Of the part, there are 2006 publications. Surface Mount is recommended for mounting. With 48 pins, the device is designed. There are 48 pins on it. Minimum working temperature for this device must not be less than -40°C. Under 85°C degrees Celsius, the operating temperature should be maintained. You should maintain a voltage of 1.5V for the supply.
9FGU0841AKILF Features
Peak Reflow Temperature (Cel): 260
uPs/uCs/Peripheral ICs Type of CLOCK GENERATOR, PROCESSOR SPECIFIC
Include 1 Circuits
with 48 Pins
operate supply voltage at the range of 1.5V

9FGU0841AKILF Applications
There are a lot of Integrated Device Technology (IDT)
9FGU0841AKILF application specific timer applications.

Routers
Ethernet switch/router
PCI Express 2.0/3.0
Broadcast video/audio timing
Processor and FPGA clocking
Any-frequency clock conversion
MSAN/DSLAM/PON
Fibre Channel, SAN
Telecom line cards
1 GbE and 10 GbE

Factory Lead Time	7 Weeks
Contact Plating	Tin
Mount	Surface Mount
Number of Pins	48
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	48
ECCN Code	EAR99
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Additional Feature	CONFIGURATION CAN BE ACCOMPLISHED W/T STRAPPING PINS, SMBUS NOT REQUIRED FOR DEVICE CONTROL
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Supply Voltage	1.5V
Terminal Pitch	0.4mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Pin Count	48
Operating Supply Voltage	1.5V
Temperature Grade	INDUSTRIAL
Number of Circuits	1
uPs/uCs/Peripheral ICs Type	CLOCK GENERATOR, PROCESSOR SPECIFIC
Frequency (Max)	100MHz
Input	Crystal
Primary Clock/Crystal Frequency-Nom	27MHz
PLL	Yes
Length	6mm
Width	6mm
Thickness	900μm
RoHS Status	RoHS Compliant
Lead Free	Lead Free
Factory Lead Time	12 Weeks
Mounting Type	Surface Mount
Package / Case	48-VFQFN Exposed Pad
Operating Temperature	-40°C~85°C
Packaging	Tray
Voltage - Supply	1.425V~1.575V
Output	LP-HCSL, LVCMOS
Input	LVDS, Crystal
Ratio - Input:Output	1:9
Differential - Input:Output	No/Yes
Main Purpose	PCI Express (PCIe)
RoHS Status	ROHS3 Compliant