AD210JN OverviewOp amp is packaged in 38-DIP (0.800, 20.32mm), 12 Leads case. Op amps are Isolation types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 12. Linear amplifier has a total of 12 pins. Please take in mind that op amp should be run at 15V. Linear amplifier includes 12 pins. Regarding input offset voltage, buffer amplifier rates 5mV voltage. Through Hole is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -25°C~85°C. Operational amplifier can operate supply current at 50mA. The voltage gain should stay at 40dB. Instrumentation amplifier has 1 channels on it. Op amp has total of 2 elements. The operating supply voltage of instrumentation amplifier is rated 15V voltage. Op amp resistance should stay within the range of 1 TΩ.
AD210JN Features12 Pins
supply voltage of 15V
40dB voltage gain
Resistance of 1 TΩ
AD210JN ApplicationsThere are a lot of Analog Devices Inc.
AD210JN Instrumentational OP Amps applications.
Proportional operation circuits
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 20 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 38-DIP (0.800, 20.32mm), 12 Leads |
| Number of Pins | 12 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Resistance | 1 TΩ |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | AD210 |
| Pin Count | 12 |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 50mA |
| Slew Rate | 1V/μs |
| Amplifier Type | Isolation |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 14.25V~15.75V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 20 kHz |
| Voltage Gain | 40dB |
| Voltage - Input Offset | 15mV |
| -3db Bandwidth | 15MHz |
| Isolation Voltage | 1.5kV |
| Height | 8.91mm |
| Length | 53.3mm |
| Width | 25.4mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD210JN Datasheet
+8613715157867