AD5161BRM50-RL7 OverviewA package containing it contains 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).As of Volatile, this pentometer has been stored.The digital potentiometer embeds 1 circuits.Tape & Reel (TR) package contains the access code to secure the digital potentiometer.For this pentometer, there are 256 taps that protect against overcurrent.In total, pentometer has 256 positions.Digital potentiometer is designed for terminations of 10.As a reference, this programmable potentiometer includes 1 functions.It is shown that, as a result, the speed potentiometers will have a total resistance of 50000Ohm.It operates on 3V and is powered by it.A 10 pin can be seen in the digi devices.You should mount in the way of Surface Mount.2.7V~5.5V voltage is available from the potentionmeter.With this digital potentiometer, the temperature range is -40°C~125°C.A flow rate limit of 50kOhm is possible.In the AD5161 family, pentometer belongs.Mounted to Surface Mount is digital potentiometer.potentiameter with 10 pins.Cascade Pin, Selectable Address can be found using this digital variable resistor.Potentiometers conduct when provided with a supply voltage of 5.5V.There is a possibility of delivering voltage at 3/5V.If the supply current is operated in the range of 3μA or higher, it will provide its performance.High accuracy can be achieved with 25MHz frequency.When the current is 3μA, potentiameter consumes quiescent current.To transfer data, there are 1.2MHz bandwidths available.
AD5161BRM50-RL7 FeaturesAvailable in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
1 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~125°C
10 pins
Operate supply voltage at the range of 5.5V
Quiescent Current at 3μA
AD5161BRM50-RL7 ApplicationsThere are a lot of Analog Devices Inc.
AD5161BRM50-RL7 Digital Potentiometers applications.
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
Adjusting the LCD Display
Voltage control
Replaces mechanical potentiometers
Matching Linear Impedance
Adjust VCOM settings
Communication device
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Tolerance | ±30% |
| JESD-609 Code | e0 |
| Feature | Cascade Pin, Selectable Address |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Temperature Coefficient | 45 ppm/°C |
| Resistance | 50kOhm |
| Number of Positions | 256 |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD5161 |
| Pin Count | 10 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Configuration | Potentiometer |
| Interface | I2C, SPI |
| Number of Circuits | 1 |
| Operating Supply Current | 3μA |
| Nominal Supply Current | 3μA |
| Memory Type | Volatile |
| Quiescent Current | 3μA |
| Bandwidth | 0.1 kHz |
| Taper | Linear |
| -3db Bandwidth | 1.2MHz |
| Number of Taps | 256 |
| Total Resistance | 50000Ohm |
| Resistance - Wiper (Ω) (Typ) | 50 |
| Resistor Terminal Voltage-Max | 3V |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD5161BRM50-RL7 Datasheet
+8613715157867