AD5161BRMZ100 Overview
This file is contained in a package of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).Volatile starts the process of storing this pentometer.This digital potentiometer has 1 embedded circuits.For securing digital analogics, it is available in the Tube package.During overcurrent, this pentometer features 256 taps.Positions are 256.The terminations are set at 10.To provide you with some reference, this programmable potentiometer includes 1 functions.As shown, the speed potentiometers's resistance will be 100000Ohm.Performance is delivered by 3V power.The digi devices shows the 10 pins.The mount should be done in the direction of Surface Mount.It is possible to supply 2.7V~5.5V volts to the potentionmeter.A digital potentiometer has a temperature range of -40°C~125°C.In this case, the flow can be limited by 100kOhm.AD5161 family member.Amount Surface Mount mounts the potentionmeter.The potentiameter has 10 pins.This digital variable resistor displays Cascade Pin, Selectable Address.A potentiometer conducts at a 5.5V supply voltage.There is a voltage delivery capability of 3/5V.Added features of this digital potentiometer include: IT CAN ALSO OPERATE FROM A 5V NOMINAL SUPPLY; 2-WIRE SERIAL CONTROL INTERFACE IS ALSO POSSIBLEFor it to perform as expected, the supply current must be in the range of 3μA.Even at 25MHz frequencies, it can maintain a high degree of accuracy.Having a maximum supply current of 3μA, digital potentiometer is able to handle any load.There is a quiescent current consumption at 3μA.The bandwidth to transfer data is 1.2MHz.
AD5161BRMZ100 Features
Available in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
1 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~125°C
10 pins
Operate supply voltage at the range of 5.5V
Quiescent Current at 3μA

AD5161BRMZ100 Applications
There are a lot of Analog Devices Inc.
AD5161BRMZ100 Digital Potentiometers applications.

Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
Adjusting the LCD Display
Voltage control
Replaces mechanical potentiometers
Matching Linear Impedance
Adjust VCOM settings

Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Factory Lead Time	8 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Operating Temperature	-40°C~125°C
Packaging	Tube
Tolerance	±30%
JESD-609 Code	e3
Feature	Cascade Pin, Selectable Address
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Temperature Coefficient	35 ppm/°C
Resistance	100kOhm
Number of Positions	256
Additional Feature	IT CAN ALSO OPERATE FROM A 5V NOMINAL SUPPLY; 2-WIRE SERIAL CONTROL INTERFACE IS ALSO POSSIBLE
Voltage - Supply	2.7V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.5mm
Frequency	25MHz
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD5161
Pin Count	10
Qualification Status	Not Qualified
Operating Supply Voltage	5.5V
Power Supplies	3/5V
Configuration	Potentiometer
Interface	I2C, SPI
Number of Circuits	1
Operating Supply Current	3μA
Nominal Supply Current	3μA
Memory Type	Volatile
Max Supply Current	3μA
Quiescent Current	3μA
Bandwidth	0.04 kHz
Taper	Linear
-3db Bandwidth	1.2MHz
Number of Taps	256
Total Resistance	100000Ohm
Resistance - Wiper (Ω) (Typ)	50
Resistor Terminal Voltage-Max	3V
Temperature Coefficient (Typ)	45ppm/°C
Height	850μm
Length	3mm
Width	3mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead