AD5170BRMZ2.5 OverviewPackage 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) contains it.At OTP, this pentometer is stored for the first time.The digital analogic is secured using this package Tube.256 taps protect this pentometer against overcurrent.256 positions make up the pentometer.A termination of 10 is intended.The following programmable potentiometer includes 1 functions.Based on the picture, the total resistance of the speed potentiometers is 2500Ohm.The performance of the product is powered by 3V.On the digi devices, you can see the 10 pins.In general, Surface Mount is recommended for mounting.It can supply voltages up to 2.7V~5.5V.For this digital potentiometer, there is a temperature range of -40°C~125°C.Flow can be restricted using 2.5kOhm.Pentometer belongs to the family AD5170.The Surface Mount mounts digital potentiometer.10 pins are present on this potentiameter.It is possible to find Selectable Address using this digital variable resistor.Potentiometers conduct when the supply voltage is 5.5V.At 3/5V, it delivers voltage.The supply current needs to be operated within the range of 3.5μA in order to deliver its performance.The maximum supply current can be set to 3.5μA.As long as 3.5μA is set, potentiameter consumes quiescent current.A bandwidth of 4.8MHz is available for data transfer.1 elements are present in digital analogic.
AD5170BRMZ2.5 FeaturesAvailable in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~125°C
10 pins
Operate supply voltage at the range of 5.5V
Quiescent Current at 3.5μA
AD5170BRMZ2.5 ApplicationsThere are a lot of Analog Devices Inc.
AD5170BRMZ2.5 Digital Potentiometers applications.
Refrigerator
Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
Adjusting the LCD Display
Voltage control
Replaces mechanical potentiometers
Matching Linear Impedance
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Feature | Selectable Address |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Temperature Coefficient | 35 ppm/°C |
| Resistance | 2.5kOhm |
| Number of Positions | 256 |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD5170 |
| Pin Count | 10 |
| Operating Supply Voltage | 5.5V |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Configuration | Potentiometer |
| Interface | I2C |
| Operating Supply Current | 3.5μA |
| Nominal Supply Current | 3.5μA |
| Memory Type | OTP |
| Max Supply Current | 3.5μA |
| Quiescent Current | 3.5μA |
| Bandwidth | 4.8 kHz |
| Taper | Linear |
| -3db Bandwidth | 4.8MHz |
| Number of Taps | 256 |
| Total Resistance | 2500Ohm |
| Resistance - Wiper (Ω) (Typ) | 160 |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD5170BRMZ2.5 Datasheet
+8613715157867