AD5204BR50 Overview
Package 24-SOIC (0.295, 7.50mm Width) contains it.At Volatile, this pentometer is stored for the first time.This digital potentiometer includes 4 embedded circuits.The digital analogic is secured using this package Tube.256 taps protect this pentometer against overcurrent.256 positions make up the pentometer.A termination of 24 is intended.The following programmable potentiometer includes 4 functions.Based on the picture, the total resistance of the speed potentiometers is 50000Ohm.The performance of the product is powered by 2.5V.On the digi devices, you can see the 24 pins.In general, Surface Mount is recommended for mounting.It can supply voltages up to 2.7V~5.5V ±2.3V~2.7V.For this digital potentiometer, there is a temperature range of -40°C~85°C.Flow can be restricted using 50kOhm.It can be classified as a DIGITAL POTENTIOMETER converter.There are the following additional features of this digital potentiometer: CAN ALSO OPERATE FROM +/-2.3V TO +/-2.7V SUPPLYIn this case, an operating tolerance of 30% is acceptable for the digipot.
AD5204BR50 Features
Available in 24-SOIC (0.295, 7.50mm Width) package
4 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~85°C
Operate Resistance Tolerance below 30%

AD5204BR50 Applications
There are a lot of Rochester Electronics, LLC
AD5204BR50 Digital Potentiometers applications.

Refrigerator
Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
Adjusting the LCD Display
Voltage control
Replaces mechanical potentiometers
Matching Linear Impedance

Mounting Type	Surface Mount
Package / Case	24-SOIC (0.295, 7.50mm Width)
Surface Mount	YES
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
Temperature Coefficient	700 ppm/°C
Resistance	50kOhm
Number of Positions	256
Terminal Finish	TIN LEAD
Additional Feature	CAN ALSO OPERATE FROM +/-2.3V TO +/-2.7V SUPPLY
Voltage - Supply	2.7V~5.5V ±2.3V~2.7V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	2.5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Pin Count	24
Qualification Status	COMMERCIAL
Number of Circuits	4
Memory Type	Volatile
Converter Type	DIGITAL POTENTIOMETER
Bandwidth	0.137 kHz
Negative Supply Voltage-Nom	-2.5V
Number of Taps	256
Total Resistance	50000Ohm
Resistor Terminal Voltage-Max	2.7V
Temperature Coefficient (Typ)	700ppm/°C
Resistor Terminal Voltage-Min	-2.3V
Resistance Law	LINEAR
Control Interface	3-WIRE SERIAL
Resistance Tolerance-Max	30%
Height Seated (Max)	2.65mm
Width	7.5mm
RoHS Status	Non-RoHS Compliant