AD5204BRUZ10-REEL7 Overview
There are 24-TSSOP (0.173, 4.40mm Width) packages in this package.Volatile is the point at which this pentometer starts to be stored.This digital potentiometer has 4 embedded circuits.Tape & Reel (TR) package provides access to it.To protect this pentometer from overcurrent, there are 256 taps.Positions 256 make up this pentometer.Digital potentiometer is designed wdigital potentiometerh terminations of 24.Listed below are 4 functions included in this programmable potentiometer.Its total resistance will be 10000Ohm.The performance of 2.5V is provided by 2.5V.In the digi devices, 24 pins can be seen.The mounting direction should be Surface Mount.It is possible for the potentionmeter to supply voltages of 2.7V~5.5V ±2.3V~2.7V.In this digital potentiometer, the temperature range is -40°C~85°C.There is a possibility of limiting the flow by 10kOhm.The AD5204 family contains pentometer.By Surface Mount, digital potentiometer is mounted.There are 24 pins on this potentiameter.When using this digital variable resistor, Cascade Pin, Selectable Address can be found.At 3/5V, it can deliver voltage.Here are some additional features of this digital potentiometer: CAN ALSO OPERATE FROM +/-2.3V TO +/-2.7V SUPPLYIn order for it to function properly, the supply current must be operated at 12μA.Supply currents up to 12μA are supported.During quiescence, potentiameter consumes 12μA volts of current.Data transfers are limited to 721 kHz bandwidth.Make sure the dual supply voltage on this pentometer is 2.7V.In order to maintain stable power, pentometer runs dual supply voltage up to 2.3V volts.
AD5204BRUZ10-REEL7 Features
Available in 24-TSSOP (0.173, 4.40mm Width) package
4 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~85°C
24 pins
Quiescent Current at 12μA

AD5204BRUZ10-REEL7 Applications
There are a lot of Analog Devices Inc.
AD5204BRUZ10-REEL7 Digital Potentiometers applications.

Modern office equipment
Industrial control
Medical equipment
Refrigerator
Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
Adjusting the LCD Display

Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Factory Lead Time	8 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-TSSOP (0.173, 4.40mm Width)
Number of Pins	24
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Tolerance	±30%
JESD-609 Code	e3
Feature	Cascade Pin, Selectable Address
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Temperature Coefficient	30 ppm/°C
Resistance	10kOhm
Number of Positions	256
Additional Feature	CAN ALSO OPERATE FROM +/-2.3V TO +/-2.7V SUPPLY
Voltage - Supply	2.7V~5.5V ±2.3V~2.7V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	AD5204
Pin Count	24
Qualification Status	Not Qualified
Power Supplies	3/5V
Configuration	Potentiometer
Interface	SPI
Number of Circuits	4
Operating Supply Current	12μA
Nominal Supply Current	12μA
Memory Type	Volatile
Max Supply Current	12μA
Quiescent Current	12μA
Bandwidth	0.721 kHz
Taper	Linear
Max Dual Supply Voltage	2.7V
-3db Bandwidth	721 kHz
Min Dual Supply Voltage	2.3V
Dual Supply Voltage	2.5V
Negative Supply Voltage-Nom	-2.5V
Number of Taps	256
Total Resistance	10000Ohm
Resistance - Wiper (Ω) (Typ)	50
Temperature Coefficient (Typ)	700ppm/°C
Length	7.8mm
Height Seated (Max)	1.2mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead