AD5252BRU100-RL7 Overview
Package 14-TSSOP (0.173, 4.40mm Width) contains it.At Non-Volatile, this pentometer is stored for the first time.This digital potentiometer includes 2 embedded circuits.The digital analogic is secured using this package Tape & Reel (TR).256 taps protect this pentometer against overcurrent.256 positions make up the pentometer.A termination of 14 is intended.The following programmable potentiometer includes 2 functions.Based on the picture, the total resistance of the speed potentiometers is 100000Ohm.The performance of the product is powered by 2.5V.On the digi devices, you can see the 14 pins.In general, Surface Mount is recommended for mounting.It can supply voltages up to 2.7V~5.5V ±2.25V~2.75V.For this digital potentiometer, there is a temperature range of -40°C~105°C.Flow can be restricted using 100kOhm.Pentometer belongs to the family AD5252.The Surface Mount mounts digital potentiometer.14 pins are present on this potentiameter.It is possible to find Selectable Address using this digital variable resistor.Potentiometers conduct when the supply voltage is 2.75V.At 3/5V, it delivers voltage.There are the following additional features of this digital potentiometer: NONVOLATILE MEMORY; DEVICE SUPPORTS DUAL SUPPLY OPERATIONWhen the frequency is set to 400kHz, it maintains high accuracy.The maximum supply current can be set to 5μA.As long as 5μA is set, potentiameter consumes quiescent current.Connect this pentometer to the max dual supply voltage of 2.75V.Dual supply voltage up to 2.25V ensures stable power.
AD5252BRU100-RL7 Features
Available in 14-TSSOP (0.173, 4.40mm Width) package
2 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~105°C
14 pins
Operate supply voltage at the range of 2.75V
Quiescent Current at 5μA

AD5252BRU100-RL7 Applications
There are a lot of Analog Devices Inc.
AD5252BRU100-RL7 Digital Potentiometers applications.

Refrigerator
Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
Adjusting the LCD Display
Voltage control
Replaces mechanical potentiometers
Matching Linear Impedance

Contact Plating	Lead, Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Operating Temperature	-40°C~105°C
Packaging	Tape & Reel (TR)
Tolerance	±20%
JESD-609 Code	e0
Feature	Selectable Address
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Temperature Coefficient	300 ppm/°C
Resistance	100kOhm
Number of Positions	256
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	NONVOLATILE MEMORY; DEVICE SUPPORTS DUAL SUPPLY OPERATION
Voltage - Supply	2.7V~5.5V ±2.25V~2.75V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Reach Compliance Code	not_compliant
Frequency	400kHz
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD5252
Pin Count	14
Qualification Status	Not Qualified
Operating Supply Voltage	2.75V
Power Supplies	3/5V
Configuration	Potentiometer
Interface	I2C
Number of Circuits	2
Nominal Supply Current	3μA
Memory Type	Non-Volatile
Max Supply Current	5μA
Quiescent Current	5μA
Bandwidth	0.04 kHz
Taper	Linear
Max Dual Supply Voltage	2.75V
Min Dual Supply Voltage	2.25V
Dual Supply Voltage	2.5V
Negative Supply Voltage-Nom	-2.5V
Number of Taps	256
Total Resistance	100000Ohm
Resistance - Wiper (Ω) (Typ)	200
Temperature Coefficient (Typ)	650ppm/°C
Length	5mm
Width	4.4mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead