AD5263BRU50-REEL7 OverviewPackage 24-TSSOP (0.173, 4.40mm Width) contains it.At Volatile, this pentometer is stored for the first time.This digital potentiometer includes 4 embedded circuits.The digital analogic is secured using this package Tape & Reel (TR).256 taps protect this pentometer against overcurrent.256 positions make up the pentometer.A termination of 24 is intended.The following programmable potentiometer includes 4 functions.Based on the picture, the total resistance of the speed potentiometers is 50000Ohm.The performance of the product is powered by 5V.On the digi devices, you can see the 24 pins.In general, Surface Mount is recommended for mounting.It can supply voltages up to 4.5V~16.5V ±4.5V~7.5V.For this digital potentiometer, there is a temperature range of -40°C~125°C.Flow can be restricted using 50kOhm.Pentometer belongs to the family AD5263.The Surface Mount mounts digital potentiometer.24 pins are present on this potentiameter.It is possible to find Cascade Pin, Selectable Address using this digital variable resistor.Potentiometers conduct when the supply voltage is 5V.There are the following additional features of this digital potentiometer: CAN ALSO OPERATE FROM 5 TO 15V SINGLE SUPPLY; 2-WIRE SERIAL CONTROL INTERFACE IS ALSO POSSIBLEWhen the frequency is set to 25MHz, it maintains high accuracy.The maximum supply current can be set to 1μA.Connect this pentometer to the max dual supply voltage of 7.5V.Dual supply voltage up to 4.5V ensures stable power.
AD5263BRU50-REEL7 FeaturesAvailable in 24-TSSOP (0.173, 4.40mm Width) package
4 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~125°C
24 pins
Operate supply voltage at the range of 5V
AD5263BRU50-REEL7 ApplicationsThere are a lot of Analog Devices Inc.
AD5263BRU50-REEL7 Digital Potentiometers applications.
Refrigerator
Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
Adjusting the LCD Display
Voltage control
Replaces mechanical potentiometers
Matching Linear Impedance
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Tolerance | ±30% |
| JESD-609 Code | e0 |
| Feature | Cascade Pin, Selectable Address |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Temperature Coefficient | 30 ppm/°C |
| Resistance | 50kOhm |
| Number of Positions | 256 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | CAN ALSO OPERATE FROM 5 TO 15V SINGLE SUPPLY; 2-WIRE SERIAL CONTROL INTERFACE IS ALSO POSSIBLE |
| Voltage - Supply | 4.5V~16.5V ±4.5V~7.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD5263 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Configuration | Potentiometer |
| Interface | I2C, SPI |
| Number of Circuits | 4 |
| Nominal Supply Current | 1μA |
| Memory Type | Volatile |
| Max Supply Current | 1μA |
| Bandwidth | 0.15 kHz |
| Taper | Linear |
| Max Dual Supply Voltage | 7.5V |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 5V |
| Negative Supply Voltage-Nom | -5V |
| Number of Taps | 256 |
| Total Resistance | 50000Ohm |
| Resistance - Wiper (Ω) (Typ) | 60 |
| Length | 7.8mm |
| Height Seated (Max) | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD5263BRU50-REEL7 Datasheet
+8613715157867