AD5282BRU50 OverviewThis file is contained in a package of 16-TSSOP (0.173, 4.40mm Width).Volatile starts the process of storing this pentometer.This digital potentiometer has 2 embedded circuits.For securing digital analogics, it is available in the Tube package.During overcurrent, this pentometer features 256 taps.Positions are 256.The terminations are set at 16.To provide you with some reference, this programmable potentiometer includes 2 functions.As shown, the speed potentiometers's resistance will be 50000Ohm.Performance is delivered by 5V power.The digi devices shows the 16 pins.The mount should be done in the direction of Surface Mount.It is possible to supply 4.5V~16.5V ±5V volts to the potentionmeter.A digital potentiometer has a temperature range of -40°C~85°C.In this case, the flow can be limited by 50kOhm.AD5282 family member.Amount Surface Mount mounts the potentionmeter.The potentiameter has 16 pins.This digital variable resistor displays Selectable Address.A potentiometer conducts at a 15V supply voltage.For it to perform as expected, the supply current must be in the range of 25μA.Even at 400kHz frequencies, it can maintain a high degree of accuracy.Having a maximum supply current of 100nA, digital potentiometer is able to handle any load.There is a quiescent current consumption at 100nA.The bandwidth to transfer data is 310 kHz.Conduct this pentometer at its max dual supply voltage of 0 volts.A dual-supply voltage can be set up to 4.5V in order to ensure stable power.
AD5282BRU50 FeaturesAvailable in 16-TSSOP (0.173, 4.40mm Width) package
2 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~85°C
16 pins
Operate supply voltage at the range of 15V
Quiescent Current at 100nA
AD5282BRU50 ApplicationsThere are a lot of Analog Devices Inc.
AD5282BRU50 Digital Potentiometers applications.
Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
Adjusting the LCD Display
Voltage control
Replaces mechanical potentiometers
Matching Linear Impedance
Adjust VCOM settings
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Tolerance | ±30% |
| JESD-609 Code | e0 |
| Feature | Selectable Address |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Temperature Coefficient | 35 ppm/°C |
| Resistance | 50kOhm |
| Number of Positions | 256 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Voltage - Supply | 4.5V~16.5V ±5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD5282 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Configuration | Potentiometer |
| Interface | I2C |
| Number of Circuits | 2 |
| Operating Supply Current | 25μA |
| Nominal Supply Current | 25μA |
| Memory Type | Volatile |
| Max Supply Current | 100nA |
| Quiescent Current | 100nA |
| Bandwidth | 0.15 kHz |
| Taper | Linear |
| Max Dual Supply Voltage | 5.5V |
| -3db Bandwidth | 310 kHz |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 5V |
| Negative Supply Voltage-Nom | -5V |
| Number of Taps | 256 |
| Total Resistance | 50000Ohm |
| Resistance - Wiper (Ω) (Typ) | 60 |
| Resistor Terminal Voltage-Max | 5V |
| Temperature Coefficient (Typ) | 30ppm/°C |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD5282BRU50 Datasheet
+8613715157867