AD534SD/883B Overview
Its packaging is made up of Tube.In order to maximize cost effectiveness, it is incorporated into the 14-CDIP (0.300, 7.62mm) package.The use of 4-Quadrant bits per stage is common.A voltage of 15V is used as the supply voltage for this device.A nominal negative supply voltage is provided for -15V.It is occupied by a modulated radio-frequency signal in the frequency range 1MHz.A 14 termination prevents signals from reflecting off the transmission line.The base part number AD534 is used to identify electronic parts that have a number of similarities.It is a type of 14-pin electronic component that is renowned for its high quality and superior performance.It is mounted on the PCB using the Through Hole method.A maximum temperature of 125°C should be maintained for the electronic device.It is recommended that the electronic device operate at a minimum temperature of -55°C.Reflow temperature limit NOT SPECIFIED is determined by the component with the lowest temperature tolerance.The operating voltage of 6mA is ideal for this device.There should be a higher dual supply voltage than 8V.It is recommended that the dual supply voltage be lower than 22V.ANALOG MULTIPLIER OR DIVIDER operates as an analog integrated circuit.It is occupied by a modulated radio-frequency signal in the frequency range 1MHz.Hence, designers are able to make full use of its flexibility because it supports the maximum input voltage of 10V.15V is the dual supply voltage for this device.Information can be stored in 4 bits.The device can be operated from a voltage supply of 22V.An element of 1 has been incorporated into it.
AD534SD/883B Features
Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 1MHz
Operating supply current of 6mA
Operating supply voltage of 22V

AD534SD/883B Applications
There are a lot of Analog Devices Inc.
AD534SD/883B Analog Multipliers & Dividers applications.

Addition and subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator and differentiator circuits
Logarithmic and exponential operation circuits
Multiplication and division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Factory Lead Time	10 Weeks
Contact Plating	Lead, Tin
Mount	Through Hole
Package / Case	14-CDIP (0.300, 7.62mm)
Number of Pins	14
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn63Pb37)
Max Operating Temperature	125°C
Min Operating Temperature	-55°C
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Supply Voltage	15V
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	AD534
Function	Analog Multiplier/Divider
Qualification Status	Not Qualified
Operating Supply Voltage	22V
Number of Elements	1
Temperature Grade	MILITARY
Analog IC - Other Type	ANALOG MULTIPLIER OR DIVIDER
Operating Supply Current	6mA
Number of Bits	4
Accuracy	0.25 %
Slew Rate	20 V/μs
Max Input Voltage	10V
Bandwidth	1MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Settling Time	2 μs
Max Dual Supply Voltage	22V
-3db Bandwidth	1MHz
Min Dual Supply Voltage	8V
Screening Level	MIL-STD-883 Class B
Dual Supply Voltage	15V
Number of Bits/Stages	4-Quadrant
Height Seated (Max)	5.08mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead