AD539SD/883B OverviewPacking materials Tube are used.This module is embedded within the 16-CDIP (0.300, 7.62mm) package in order to provide cost-effectiveness.There is a considerable amount of use of 2-Quadrant bits per stage.The device operates at a voltage of 5V.In this case, the supply voltage is nominally negative and referred to as -5V.There is a modulated radio-frequency signal in the range of 60MHz.In order to prevent signals from reflecting off the other end of the transmission line, there are 16 terminations.A number of electronic parts with a similar part number can be found under AD539.It is a type of 16-pin electronic component noted for its superior performance and high quality.For mounting the component on the PCB, Through Hole is used.It is recommended that the device operate at a temperature of 125°C.Temperatures below -55°C should be maintained to ensure proper operation of electronic devices.The reflow temperature limit NOT SPECIFIED is determined by the component having the lowest temperature tolerance.In addition, it is ideally suited for the operating supply voltage of 10.2mA.The ANALOG MULTIPLIER OR DIVIDER integrated circuit operates on an analog basis.There is a modulated radio-frequency signal in the range of 25MHz.Due to its capability to handle a maximum input voltage of 4.2V, designers can make full use of its versatility.There is the possibility of storing 2 bits of information.The unit can operate at 15V volts of supply voltage.
AD539SD/883B FeaturesSupplied in the 16-CDIP (0.300, 7.62mm) package
Bandwidth of 60MHz
Operating supply current of 10.2mA
Operating supply voltage of 15V
AD539SD/883B ApplicationsThere are a lot of Analog Devices Inc.
AD539SD/883B Analog Multipliers & Dividers applications.
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video and image computer boards
Medical instruments
Television broadcasting equipment
Displayers for aircraft and air transportation control systems
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Factory Lead Time | 10 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD539 |
| Function | Analog Multiplier/Divider |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Power Supplies | +-5V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 4.5V |
| Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
| Operating Supply Current | 10.2mA |
| Number of Bits | 2 |
| Accuracy | 2.5 % |
| Max Input Voltage | 4.2V |
| Bandwidth | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| -3db Bandwidth | 25MHz |
| Screening Level | MIL-STD-883 Class B |
| High Level Output Current | 2.8mA |
| Low Level Output Current | 2.8mA |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Positive Input Voltage-Max | 2V |
| Number of Bits/Stages | 2-Quadrant |
| Length | 19.05mm |
| Height Seated (Max) | 5.08mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD539SD/883B Datasheet
+8613715157867