AD620BN OverviewA 8-DIP (0.300, 7.62mm) case is used to package the op amp. Instrumentation-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 30mV. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 1.3mA volt supply current is needed for this linear amplifier to operate. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 36V. There is a minimum voltage gain of 1 that this buffer op amp is capable of conducting. 10GOhm should be the range of resistance for the linear amplifier.
AD620BN Features8 Pins
supply voltage of 15V
Resistance of 10GOhm
AD620BN ApplicationsThere are a lot of Analog Devices Inc.
AD620BN Instrumentational OP Amps applications.
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Max Power Dissipation | 650mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD620 |
| Pin Count | 8 |
| Operating Supply Voltage | 36V |
| Number of Elements | 1 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1.3mA |
| Power Dissipation | 650mW |
| Slew Rate | 1.2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 93 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~36V ±2.3V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 30mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage - Input Offset | 15μV |
| -3db Bandwidth | 1MHz |
| Input Offset Current-Max (IIO) | 0.00075μA |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.004% |
| Length | 9.27mm |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD620BN Datasheet
+8613715157867