AD698AP Overview
The product is packaged with the materials of Tube.In order to save space, 28-LCC (J-Lead) packages are used.This type of Signal Conditioner provides superior performance.Sensor and detector interface is mounted using the Surface Mount technique.To avoid unnecessary cooling processes, it is recommended that the operating temperature be kept at -40°C~85°C.The input type is Voltage.In order to prevent signals from reflecting off the end of the transmission line, 28 terminations are used.Electronic parts related to this part can be found by using its base part number AD698.A number of 1 functions have been configured.A voltage of 15V is used as the supply voltage.Electronic devices with 28-pins are used in this device.Pins on 28 components are designed to perform the specified functions.There is a mounting in the way of Surface Mount.By maintaining the operating supply current at 15mA, improved efficiency can be achieved.A failure will occur if the supply voltage exceeds 13V.If the supply voltage is below 13V, failures will occur.Using it, 40mA can be controlled in terms of its output current.
AD698AP Features
With 15V channels
operate temperature at the range of 15mA

AD698AP Applications
There are a lot of Analog Devices Inc.
AD698AP applications of sensor and detector interfaces.

Engine Knock Detector Signal Processing
Analog Signal Processing With Filter Characteristics
Camshaft VRS Interfaces
Crankshaft VRS Interfaces
Vehicle Speed VRS Interfaces
Automatic Lighting (Residential and Commercial)
Automation of Doors
Motion Triggered Events (Animal photography)
Position sensor
Level transmitter

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Number of Pins	28
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Type	Signal Conditioner
Terminal Finish	Tin/Lead (Sn85Pb15)
HTS Code	8542.39.00.01
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	225
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD698
Pin Count	28
Max Supply Voltage	13V
Min Supply Voltage	13V
Operating Supply Current	15mA
Output Current	40mA
Input Type	Voltage
Max Input Voltage	3.5V
Bandwidth	20 kHz
Negative Supply Voltage-Nom	-15V
Source Url Status Check Date	2013-05-01 14:56:16.334
Negative Supply Voltage-Max	-18V
Negative Supply Voltage-Min	-6.5V
Length	11.505mm
Height Seated (Max)	4.57mm
REACH SVHC	No SVHC
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead