AD7730LBR OverviewI have packaged it in a way that is similar to 24-SOIC (0.295, 7.50mm Width)'s.24 Bits were used in the design of this electronic part.There is an embedded version of it in the Tube package.24 termination is a method of terminating transmission lines with impedance matching devices.This electrical device has a supply/digital voltage of 2.7V~5.25V which indicates the power supply/digital voltage.The base part number of the product allows the identification of its related parts based on the part number.As far as the supply voltage goes, it should be kept at 5V.To ensure the reliability of the device, it operates at a minimal operating temperature of -40°C.As a result, it is operating at a temperature which is maximal for its reliability, which is 85°C.In addition, it is equipped with a 24 pin count.In addition to that, it supports the maximum voltage of the 5.25V supply.As the maximal voltage supplied for its operation reaches 4.75V, it is considered to be in operation.The efficiency of the power supply will be high if a constant supply voltage of 5V is maintained.2 channels are available on the A/D converter.It should be noted that this electronic part can accept any input type up to 5V.It is possible to use ADC, DELTA-SIGMA converters based on the input voltage of the source and the output voltage of the converter.
AD7730LBR FeaturesAD7730LBR ApplicationsThere are a lot of Analog Devices Inc.
AD7730LBR AFE applications.
Digital signal processing
Scientific instruments
Rotary encoder
Displaying
Transducer
Microcontrollers.
Digital Storage Oscilloscope
Scientific instruments.
Music reproduction technology
Communication Systems
| Contact Plating | Lead, Tin |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 125mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD7730 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Bipolar, Unipolar |
| Temperature Grade | INDUSTRIAL |
| Interface | SPI |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation | 32.5mW |
| Number of Bits | 24 |
| Min Input Voltage | 1V |
| Max Input Voltage | 5V |
| Converter Type | ADC, DELTA-SIGMA |
| Supply Type | Analog, Digital |
| Resolution | 3 B |
| Sampling Rate | 5 Msps |
| Evaluation Kit | Yes |
| Voltage - Supply, Digital | 2.7V~5.25V |
| Number of Analog In Channels | 2 |
| Output Bit Code | BINARY |
| Output Format | SERIAL |
| Signal to Noise Ratio (SNR) | 114 dB |
| Number of Analog Inputs | 2 |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD7730LBR Datasheet
+8613715157867