AD7788ARM OverviewThe analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 1 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 240 to be essentially indestructible.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 16.6 Hz.The input type of this electronic AD converter is Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.5V~5.25V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to AD7788 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single is a coding scheme for identifying supply types.The supply/digital voltage of this electrical AD converter is 2.5V~5.25V.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 2.7V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.The ADC converter operates from 3/5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 400μW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 400μW.The number of channels is growing strong/weak: 1.The maximal input type of this electronic AD converter is 5.25V.The digital converter supports the minimal input voltage of 100mV.
AD7788ARM Features1 Functions
10 basic kinds of terminations
10 pin count
Minimal supply voltage of 2.7V
3/5V power supplies
AD7788ARM ApplicationsThere are a lot of Analog Devices Inc.
AD7788ARM ADC applications.
Music recording
Digital signal processing
Scientific instruments
Rotary encoder
Displaying
Transducer
Microcontrollers.
Digital Storage Oscilloscope
Scientific instruments.
Music reproduction technology
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Power Dissipation | 400μW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD7788 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Polarity | Bipolar |
| Power Supplies | 3/5V |
| Configuration | ADC |
| Number of Channels | 1 |
| Interface | SPI |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 400μW |
| Number of Bits | 16 |
| Input Type | Differential |
| Min Input Voltage | 100mV |
| Architecture | Sigma-Delta |
| Max Input Voltage | 5.25V |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | SPI, DSP |
| Resolution | 2 B |
| Sampling Rate | 16.6 sps |
| Voltage - Supply, Analog | 2.5V~5.25V |
| Voltage - Supply, Digital | 2.5V~5.25V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 16.6 |
| Output Bit Code | BINARY, OFFSET BINARY |
| Linearity Error-Max (EL) | 0.005% |
| Output Format | SERIAL |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD7788ARM Datasheet
+8613715157867