AD7847AR OverviewA 24-SOIC (0.295, 7.50mm Width) package is provided with this component. An electrical supply voltage of 15V powers it. An FPGA module can be attached to a development board with a Surface Mount-pin. During the operation of the system, the operating temperature should remain within the range of -40°C~85°C. It is for space saving reasons that this FPGA model is contained in Tube. As a whole, it has 24 terminations. Related parts can be found by using its base part number AD7847. 24 pins are designed into the device. In addition to this, it has 24 pins. A maximum voltage of 15.75V can be supplied to it. As long as the supply voltage is at least 14.25V, it is able to work properly.
AD7847AR Features24-SOIC (0.295, 7.50mm Width) package
24 pin count
24 pins
Minimal input voltage of -10V
AD7847AR ApplicationsThere are a lot of Analog Devices Inc.
AD7847AR Digital to Analog Converters (DAC) applications.
Data Distribution System
Digital Potentiometer
Software Radio
Wireless infrastructure:
WCDMA, CDMA2000, TD-SCDMA, WiMAX
Wideband communications:
LMDS/MMDS, point-to-point
Instrumentation:
RF signal generators, arbitrary waveform generators
Mobile Communications
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | AD7847 |
| Pin Count | 24 |
| Output Type | Voltage - Buffered |
| Polarity | Unipolar |
| Max Supply Voltage | 15.75V |
| Min Supply Voltage | 14.25V |
| Power Dissipation | 210mW |
| Number of Bits | 12 |
| Supply Current-Max | 10mA |
| Max Output Voltage | 20V |
| Min Input Voltage | -10V |
| Slew Rate | 11 V/μs |
| Architecture | R-2R |
| Max Input Voltage | 10V |
| Converter Type | D/A CONVERTER |
| Reference Type | External |
| Data Interface | Parallel |
| Differential Output | No |
| Resolution | 1.5 B |
| Sampling Rate | 250 ksps |
| Voltage - Supply, Analog | ±14.25V~15.75V |
| Min Output Voltage | 0V |
| Settling Time | 5μs |
| Max Dual Supply Voltage | 15.75V |
| Integral Nonlinearity (INL) | 1 LSB |
| Min Dual Supply Voltage | 14.25V |
| Input Bit Code | BINARY, OFFSET BINARY |
| Dual Supply Voltage | 15V |
| Number of Converters | 2 |
| Conversion Rate | 250 ksps |
| INL/DNL (LSB) | ±1 (Max), ±1 (Max) |
| Negative Supply Voltage-Nom | -15V |
| Height | 2.35mm |
| Length | 15.6mm |
| Width | 7.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD7847AR Datasheet
+8613715157867