AD8001ARZ OverviewPackaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A Current Feedback-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 5.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 5mA , this buffer op amp will be able to operate. 1 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 9V. As a result, linear amplifier's quiescent current is 5mA.
AD8001ARZ Features8 Pins
supply voltage of 5V
AD8001ARZ ApplicationsThere are a lot of Analog Devices Inc.
AD8001ARZ Instrumentational OP Amps applications.
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 800mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8001 |
| Pin Count | 8 |
| Operating Supply Voltage | 9V |
| Power Supplies | +-3/+-6V |
| Number of Channels | 1 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Power Dissipation | 800mW |
| Quiescent Current | 5mA |
| Slew Rate | 1200V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 54 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | ±3V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 5.5mV |
| Bandwidth | 880MHz |
| Gain Bandwidth Product | 795MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2mV |
| Settling Time | 10 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 715MHz |
| Bias Current-Max (IIB) @25C | 25μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8001ARZ Datasheet
+8613715157867