AD8055ARTZ-REEL7 OverviewPackaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. An op amp ic of the Voltage Feedback type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 5. The pins on this board total to 5 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 5 pins are present on the instrumentation amplifier. There is an input offset voltage of 5mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 6.5mA, this op amp ic can operate. Keeping the voltage gain at 71dB is the best course of action. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of the buffer op amp is rated at 10V. Currently, linear amplifier is operating with a quiescent current of 6.5mA.
AD8055ARTZ-REEL7 Features5 Pins
supply voltage of 5V
71dB voltage gain
AD8055ARTZ-REEL7 ApplicationsThere are a lot of Analog Devices Inc.
AD8055ARTZ-REEL7 Instrumentational OP Amps applications.
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | AD8055 |
| Pin Count | 5 |
| Operating Supply Voltage | 10V |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Quiescent Current | 6.5mA |
| Slew Rate | 1400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 8V~12V ±4V~6V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 300MHz |
| Gain Bandwidth Product | 120MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 71dB |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Voltage - Input Offset | 3mV |
| Settling Time | 20 ns |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Input Voltage Noise Density | 6nV/sqrt Hz |
| Height | 1.15mm |
| Length | 2.9mm |
| Width | 1.6mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8055ARTZ-REEL7 Datasheet
+8613715157867