AD8092ARZ-REEL OverviewA 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Voltage Feedback-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 11mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 11mA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 98dB. There are 2 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is a quiescent current of 5.5mA in this operational amplifier circuit.
AD8092ARZ-REEL Features8 Pins
supply voltage of 5V
98dB voltage gain
Output Type: Rail-to-Rail
AD8092ARZ-REEL ApplicationsThere are a lot of Analog Devices Inc.
AD8092ARZ-REEL Instrumentational OP Amps applications.
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8092 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 11mA |
| Output Current | 45mA |
| Quiescent Current | 5.5mA |
| Slew Rate | 170V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 1.4μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 11mV |
| Gain Bandwidth Product | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 110000 kHz |
| Voltage Gain | 98dB |
| Average Bias Current-Max (IIB) | 3.5μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1.8mV |
| Settling Time | 50 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 110MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.4pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Wideband | YES |
| Length | 4.9mm |
| Height Seated (Max) | 1.75mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8092ARZ-REEL Datasheet
+8613715157867