AD8131ARZ-REEL7 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Differential-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 2mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 10.25mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 6.19dB for the time being. 1 elements make up the design of this buffer amplifier. During testing, the instrumentation amplifier resistance should remain within a range of 1.5kOhm.
AD8131ARZ-REEL7 Features
8 Pins
supply voltage of 5V
6.19dB voltage gain
Resistance of 1.5kOhm

AD8131ARZ-REEL7 Applications
There are a lot of Analog Devices Inc.
AD8131ARZ-REEL7 Instrumentational OP Amps applications.

Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards

Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Factory Lead Time	8 Weeks
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	540.001716mg
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	1.5kOhm
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD8131
Pin Count	8
Number of Elements	1
Power Supplies	5/+-5V
Operating Supply Current	10.25mA
Power Dissipation	250mW
Slew Rate	2000V/μs
Amplifier Type	Differential
Common Mode Rejection Ratio	70 dB
Current - Input Bias	500nA
Voltage - Supply, Single/Dual (±)	2.8V~11V ±1.4V~5.5V
Output Current per Channel	60mA
Input Offset Voltage (Vos)	2mV
Gain Bandwidth Product	400MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Voltage Gain	6.19dB
Power Supply Rejection Ratio (PSRR)	70dB
Supply Voltage Limit-Max	5.5V
Voltage - Input Offset	1.5mV
Neg Supply Voltage-Max (Vsup)	-5.5V
Length	4.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead